TUSA M-32 Imprex 3D Hyperdry Scuba Diving Mask, Cobalt Blue

Very sturdy, with excellent side views and a wide, soft contact with my face that allows for a very easy fit and seal. Easy to get excess water out through the purge valve.

I used this for snorkeling on a very recent trip to Maui. Good visibility, and as a guy with a mustache, it did a pretty good job. It didn’t seal 100%, but it was close, and having the mask clearing valve basically made it a non-issue for the little water that would seep in.

Read a website review on best mask if you have a mustache. This one worked great for snorkeling. I bought sealer stick but didn’t need it. I don’t have a super thick mustache and I trimmed about 1/4 inch below my nose. The blowout valve works great too.

Excellent glass and superb clearing vent.

I purchased a valve mask from this company years ago. Their quality has gone down.The valve is not as effective as clearing water as it used to be.I can no longer recommend them.

After diving for so many years and going through numerous masks, this might just be THE one I will keep forever!+ The one-way valve is obviously the biggest feature, but truthfully it should be considered as secondary because of the near-perfect seal of the mask skirt! Haven't experienced any water leakages so far (even with strap adjusted a tad bit loose).+ The side windows are highly effective in increasing peripheral vision range underwater, especially when spotting other divers at the corner of your eye without having to turn.! The mask's profile is not as 'slim' as other masks due to the integrated side windows and one-way valve.! THE SEAL AT THE BOTTOM SIDE OF THE SKIRT (COVERING FROM NOSE TIP TO UPPER LIP) CAN BE SLIGHTLY INTRUSIVE. The edge of the seal almost touches my upper lip when I'm wearing it (perhaps due to my smaller face profile). If your regulator mouthpiece is big and protruding the upper lip, it might affect the seal and you'd have to adjust your mask position occasionally.! If your strap adjustment is looser, the mask may tend to move upwards a bit as you're swimming/diving, which can lead to blocking your nostrils on the bottom seal (mentioned above) and you won't be able to exhale through the one-way valve. Simply push the mask down slightly until you are able to exhale through the valve.

I don't have an unusually large snoz, but the nose piece with the hard plastic purge valve is fatiguing after about 20 minutes or so into a dive. The bottom of my nose (where it meets the top of my mouth) ends up pretty sore at the end of a dive, and it's entirely due to the hard plastic purge valve. If there was a little more silicone there or a slight design tweak, I would probably love this mask.The field of view is super open and even with a full beard, there wasn't any more leaking than I've experienced with any other mask. I'm confident if I were clean-shaven, there would be no, or very little, leaks.Great concept, just needs a little more work.

i bought this model first, thinking i would like the extra light from the clear surrounds. but i found that distracting and reducing contrast instead, so i exchanged it for the one with a black surround -- much better.

Maske passt gut, hat eine sehr gute rundum Sicht.Gurt lässt sich auch gut spannen, sitz dadurch sicher.Hat auch bei sehr bewegtem Wasser sicher gesessen.