Peslv Magnetic Laptop Privacy Screen 14 inch for 16:10 Computer Monitor, 14" Removable Anti Glare Protector Blue Light Filter Shield Compatible with Lenovo Hp Dell Acer Asus Thinkpad Envy Xps

I originally wanted to protect the screen on my new lenovo thinkpad with a glass protector but they're all glossy and I wanted to keep the anti-glare finish. After some research I decided on this one. The material was thicker and stiffer than I expected, not a film but more like a sheet of hard plastic. This improves protection so I'm pleased. The sizing fit my 14" 16:10 screen perfectly, about 1 mm gap at most between edges. The finish is more matte/dull than the original anti-glare, and further reduces glare. This comes at a cost of slightly reduced text crispness. Pick one: crisp text and glossy/reflective, or softer text and low reflectivity. Screen colour remains rich and beautiful. The product claims to reduce blue light but I don't notice a difference in colour, which is perfect for me. I've attached several photos of the screen taken in a sunny indoor location with the protector attached. You can see some glare on the left side but overall it's pretty minimal for the amount of sun it's receiving. Application Directions and provided stickers for alignment were adequate. Perfect application is always a pain but it's straight-forward. I messed up the first one. I cleaned the screen thoroughly, first with a little dish soap and warm water using a microfibre cloth, then the alcohol pad. I couldn't see any dust so I started applying the screen. Of course about 2/3 of the way through there were several dust bubbles so I aborted and started with a new sheet. The second screen went on almost perfectly. Because the material is stiff it's difficult to maneuver at the end and the application sticker popped off and the last 1/8th of the screen came down before I could squeegee the bubbles. It sticks well so I couldn't lift it back up without risking damaging the finish. I managed to get all but one small bubble out which stubbornly refused to move to the edge of the screen using the squeegee. The next day I worked on it by gently rubbing in circles with my clean dry fingers and it seems to have disappeared. I did this with the screen on for a while to warm up, this might've helped. Be very careful doing this, don't apply much pressure and support the back of the screen with your hand to prevent flex. My advice for application is to place a thin piece of clean plastic (e.g. guitar pick) on the screen edge on opposite side of where you begin to apply the screen. That way if it drops suddenly, there is something to prevent it from closing too early, leaving trapped bubbles. Overall highly recommended if you want extra protection. Remember, there are drawbacks to all screen protectors, and application is finicky so be prepared to use more than one protector to get it right.

Allows me to work with privacy while I commute on the train... great value!!! The stickers that come with it to secure the bottom don't last long, but I just used a few little strips of Scotch gift tape and it hasn't been an issue since

I ordered this for my Thinkpad X1 Yoga Gen 6 as it seemed like a really good option. It was not. You absolutely needed to remove the screen before closing the laptop because the top magnets would magnetize to the keyboard side and come off of the screen, even with the stickers on the bottom. This didn't work for me as I didn't want to take it off every time I closed the laptop. I contacted their support through Amazon's chat feature, and they got back to me asking if I would like to try the 16:10 non-magnetic privacy screen they offer with just the normal clear adherence strips. I said yes and they were kind enough to send me that right away. I have since put that one on, and it works perfectly and stays on the screen wonderfully. The 5-star review is really for the second screen and their customer support. Very good experience.

This is a horrible product and I should have looked at the negative comments before purchasing. These 1 star comments should be highlighted because I now feel stuck with this product with no way to make it better unless taking it back to the Apple Store to help remove the screens. Two major problems with this product: 1) The installation is impossible. The installation instruction contains many broken English that doesn't even make sense. The film provided with the screen are highly sticky; the screen itself is heavier that it won't stay up with just the tiny stickers provided, which means I have to use one hand to hold up the screen, the other hand to peal the inside layer of the film, which then keep trying to stick it back to the laptop. By the time I "fight off" the very static film, the actual screen protector snap right onto my laptop screen, with bubbles, and there is no way to remove the bubbles even the instruction indicated otherwise. Even if I no longer want to use this product, I don't even know how to remove the screen unless I take it to the Apple Store. 2) The protector itself is not a clear screen protector. I now see grains when looking at the laptop screen rather than the super high resolution quality from Apple's Liquid Retina XDR. This is the kind of moments where I will learn my lesson and purchase these types of products directly at the Apple Store to ensure it's done correctly and satisfactory.

First, this is for the Blue Light Screen Protector Bought it for my Macbook Pro M4 2024 14" I was feeling intimidated to install it and let it sit around for a few weeks. Lol. Finally did it yesterday. The instructions in the booklet were confusing and had grammatical errors (they should hire me, a Native English speaker) However, I just saw there is a video available here on the Amazon site under the product. Anyway I kind of figured out a way, having done screen protector installations on my iphone before. Pretty easy. Got a few bubbles the first time, but then I just lifted it up and used my fingers to push down on the edge touching the screen while the edge advanced right to left, to the edge of the screen, if that makes sense? I hope it does. So far it looks great! My only wonder is "Is it really blocking blue light?" and if so, is it really blocking 99% as it claims? I'm trying to find out a way to verify it. If anyone has verified it objectively please let me know. Oh and it seems to be a great value for the money. You get 3 screens and this is a pretty inexpensive price. I did not order the privacy option, so I cannot comment on that. The quality seems good.

I haven't been troubled by lamplight or by sunlight on my laptop's screen since I installed this. It's an excellent anti-glare film. I did want to raise the brightness level of my screen from 50 to 65 percent after installing it. The instructions are very clear and very helpful. I just had to gather up my patience and focus on staying calm. I think it would have been more difficult if I hadn't been able to lay my screen on a flat work surface. Do measure your screen as it's a tight fit. There are instructions for removing the one small dust bubble that I'm left with but I'm afraid of attracting even more dust if I try to do that. I hardly notice it anyway. I recommend this if you are troubled by glare.

The privacy screen came with all necessary accessories for installation and the privacy aspect is decent enough for my usage, but not the best. The sizing is a bit off with gaps on the side, top (where the cut out is) and bottom (worst gap by about 3/8"). The magnet aspect works but the strength of the magnet isn't the best. You can use more than two magnets that can help. One issue that arises is when closing the laptop with the privacy screen on, the screen is attracted to the speaker magnets and when opening the lid, the privacy screen disconnects from the main screen and lays on the keyboard, essentially forcing you to reinstall the screen. Lastly, the screen is a dust magnet as well. I'd consider not using the magnets and using the sticky gel if the sizing of the screen matched my device better. I waited awhile to install this, so unfortunately outside the return window. PROS • Magnetic connection • All accessories included for installation CONS • Sizing does not match 100% • Magnet strength isn't great • Screen privacy isn't the best • Screen attracts a lot of dust

The PESLV Magnetic Laptop Privacy Screen (13.3-inch, 16:9) fits my DELL XPS 13 9310. is an excellent solution for protecting your on-screen information in public places, classrooms, or shared workspaces. The magnetic design makes installation simple—no adhesives, no residue, and easy removal whenever you need a transparent display. It effectively narrows the viewing angle, so only the person directly in front of the screen can see your work, helping maintain privacy. The anti-glare surface also reduces reflections, making long working sessions more comfortable. Overall, it’s a practical and durable privacy filter that enhances both security and usability for your laptop.