Guyker Guitar Tune-O-Matic Bridge and Stop Bar Tailpiece Combo Replacement Compatible with LP SG EPI 6 String Electric Guitar(GS001 + GM005, gold)

Used this to bring back a dead Epiphone LP Special 2. Huge upgrade. Works fantastic, locks in place, world better than the stock setup. Looks great, shiny and no flaws. Perfect fit with low action, comparable to my Jackson action on this budget rebuild! I really like these bridges for the price and just how good they perform.

Very good and a great price! I haven’t had any tuning issues with these and they installed with no issues. The black finish also looks great on my purple Explorer!

I recently swapped out the stock hardware on my Les Paul/SG style guitar with this Guyker Tune-O-Matic Bridge and Stop Bar set, and I’m genuinely impressed with the results given the price point. Build Quality & Finish: The zinc alloy construction feels sturdy and has a good weight to it. The finish (Chrome/Black/Gold) is clean with no noticeable pitting or machining marks. The saddles move smoothly on the bridge, which is a big step up from some "budget" hardware that can feel gritty. Installation: Swapping it out was straightforward. It fit perfectly on my existing posts, though the kit does come with its own studs and inserts if you’re doing a fresh build or need a total replacement. It’s an easy "drop-in" mod that doesn't require permanent modifications to the guitar body. Performance & Tone: The most immediate difference was in tuning stability. The strings seem to seat better, and I’ve noticed a slight but welcome increase in sustain. The individual saddles provide plenty of travel for precise intonation, which was a struggle with my old worn-out bridge. Pros: Excellent value for the money compared to high-end boutique brands. Easy to install and adjust. Smooth saddle action for accurate intonation. Cons: The screws and clips are standard quality; just be careful not to over-torque them during setup to avoid stripping. Bottom Line: If you’re looking to upgrade a budget-to-midrange guitar or finishing a project build, this Guyker set is a fantastic choice. It provides professional-level stability and a fresh look without the "brand name" markup.

Bought to upgrade a Chinese Les Paul style guitar. Very good item. Good appearance and solid. Tail piece studs fit right in but the bridge studs require a larger hole.

Solid replacement for stock bridge and stop bar. I've used these on several Epiphones and much better than the wire tune-O-matics that vibrate/buzz.

Gold was what ended up on my Gibson inspired, Epiphone ES 335 in gold. This roller bridge and stop bar works perfectly. Get the Stew Mac Tune o Medic tool kit for best results. You don't want to mess up the stop bar adjustment screw heads. The tool kit is a must for setups with this bridge and stop bar. The rollers are good and the entire package is a great upgrade for an Epiphone. My ES 335 now enjoys more sustain and better tone. Yes you get lots of tuning stability. You can put the stop bar at the lowest setting. This puts max pressure on the bridge and that helps tone. The strings do not touch the bridge when set up like this.

I have a 2007 Korean-made Epiphone Sheraton II. It's a guitar notorious for being hard to find a replacement bridge for. This dropped right onto my existing posts. It SEEMED to not fit at first but then I remembered; the bridge has small set screws on it so when the strings are off the bridge doesn't just fall off. Just back those out a little first. There is an included little allen wrench in the package. So far it works perfectly. Took 12 seconds to install.

Guyker does it again with some bling for my SG standard. This piece looks legit it fit perfect and tuned easily function is just like factory. This ain't no middle of the mall junk.

Muy satisfecho, me parece igual o ligeramente mejor a los de una les paul custom Epiphone, fue a la que se lo instale

Está bien en precio y calidad, el material es bueno y llegó tal y como está en la publicación. El sonido superó mis expectativas y las notas se hacen ligeramente más largas aunque no tanto como lo habían descrito en otras publicaciones. Lamentablemente quedo muy alto y no se puede bajar más. El paquete está protegido y todo nuevo. Llegó en tiempo y forma

Fantastic bridge. This is what the expansion of global manufacturing has meant. Previously items like electric guitar parts were mostly manufactured in the USA, Germany & Japan. Availability was kept low due to high demand, and prices followed suit. A TOM bridge and tailpiece would cost you over $100 and you’d have to swallow all the bs ad copy justifying the high price. No more. Thanks to capitalism with Chinese characteristics it is now possible to purchase guitar parts that range from barely tolerable stamped metal pieces to gorgeous boutique/artisan quality hardware from reliable suppliers who run their businesses competitively. The end result is a plethora of guitar parts at reasonable prices, sometimes even lower. How can you argue with that? Is it putting American companies out of business? Absolutely. Is it fair? Of course not. Who said that capitalism was “fair”? If it was fair it’d be called “socialism”

Huge improvement over the original bridge on my Epiphone. These should be standard on all LP style guitars. It fit perfectly with no problems at all.

La presentación en el paquete es un 10, y la calidad de las piezas, casi sin holguras en los rodillos de las cuerdas, el acabado sobre metal bien duro (parece que resiste bien los rayones) y el ajuste de lo bien que encajan unas piezas con otras... Por 25€??!! Repetiré seguro.