OCEANBROADEVA Foam Boat Flooring with 3M Adhesive Backing Marine Self-Adhesive Decking 96''x45.6''/36''/28.8''/16.8'', 48''x16.8'' Faux Teak Sheet for Jon Boats Swim Platform Helm Pad RV Floor

Cut the product to the size I needed, applied 3M spray adhesive and rolled the pieces to the steps. Looks great, gives a little cushion and adds traction. Easy to complete and awesome results.

I bought this product based on prior reviews and 3M adhesive factor. I used rosin paper to make the templates which was great because it was sturdy and easy to work with. Ilas far as cutting the flooring, be sure to have multiple utility knives and lots and lots of blades. I have no idea how many I went through however it was a lot. You can tell real quick when your blade needs replaced because it starts to snag and becomes difficult to cut. When cutting I had layers of cardboard underneath it and used a metal “L” to run the blade along. When installing, I pulled part of the backing off and got into place little by little before removing more of the backing. I did purchase a small roller to help apply pressure when installing, I would definitely recommend the roller. The end result is great, there are some imperfections in the installation however that is on me not the product. Looking forward to boating season starting to get enjoy the flowing instead of scrubbing the fiberglass floor nonstop. We have a 23’ Monterey Explorer and was able to do the inside of the boat and the back platform off of three full size sheets.

This will look great as long as you don't walk on it. It's easy to install, adhesion is good but it holds dirt, especially mud. I'm not overly impressed with how difficult it is to keep clean and time will tell if it's durable. One suggestions on measuring and cutting. I would make every cut at least a 1/2 inch more than you measure so you can pull it tight to all of your edges. Cutting to the measured areas left a few gaps.

This floor was fairly easy to install on our boat and the color was just like the photo.We haven’t had it on that long, but so far so good. Will update this if it starts pealing of.

Sorry, I don't have any pictures. (I will try to add later) I re-did my Tracker 175 PT. I can't say enough about the product. First the color was spot on, no fade or blemish. Delivery was very fast. I will say that I added 3M adhesive to the backing for a more permanent stick. If you are going to do a large project I would say make sure you order the larger rolls. I made that mistake and had to order additional rolls; however the color and patterns were still good although they came from a different roll. Yes this is water proof as rain has already came upon my boat and it does clean up pretty well. My final test will be this summer, hopefully I can walk barefooted on the boat without burning my feet as the vinyl did. Lastly, make sure you have plenty of sharp razors for your cuts. (For this job, 30 razors minimum) Overall this cost me about a week of my time and under $700. Seadeck wanted $3-4k. mj

Easy to install

I'm only using this product in a few small'ish places on my boat where I wanted some extra non-slip traction. I carefully cleaned each location with isopropyl alcohol and pressed it in tightly with a roller. After about 3 months it's mostly holding, but is coming loose in a few places. It's a surprisingly stiff product, even after sitting in the hot sun, but the quality of the actual product is substantial.

More comfortable, sticks down great with the 3M backing. Hard to flatten out from the rolled shape. Templates are the way to go for a neat job. Plus new razor knife blade after each few feet of cut

This is as good as seadek. You must be patient when installing but it's worth it in the end. The only complaint is that I didn't order enough to do the whole boat. When I went to re-order the product was no longer available.

The media could not be loaded.  Very dissatisfied with this purchase. Do not recommend seller. Width not accurate per the site.

Love the product looks great lots of nice comments of the product

Nous avons utilisé ce produit pour un voilier, afin que notre chien ne glisse pas.Nous allons voir à l’usure. Si les griffes n’endommagent pas le produit.

Very easy to work with