Lamin-x One 4 inch x 8 inch Universal Film Cover (Color : Amber)

The media could not be loaded. Edit: 6 weeks later. I found you should ho straight to their website they have precut circles for our fogs. Just a heads up. I'll be purchasing from their site from now on.I wanted to get a set of amber fogs for the taco but after seeing how proud some companies are of theirs. I decided to try another route. "Cheaper" First choice was cheap repair tape from the auto store just to see if I could get a match in color. No luck. Too Yellow. However Lamin-x amber 4x8 sheet worked perfectly. I'll put up pictures later when it's darker. For now here's a few in the daytime. Much better than the other color I might add. Thick and movable with great adhesive. I laid it over the light and pushed out towards the edges. When I had the surface stuck I trimmed the excess off with scissors which allowed the edge of the film to roll over the edge of the light housing. Exact off the rest of the excess. If needed I used a blow-dryer to really stick down the edges. I'm happy with the outcome. As always check with your local laws and authorities before applying this product to on-road vehicles.

Excellent product. Think vying for easy peel and stick installation. The perfect amount of material to do the job. Very little waste. The look is better than i expected. Great color match to my 20=inch amber light bar.

One 4" x 8" Universal Film Cover (Color : AMBER )PRO:A. Thick, and protective. Not flimsy window tint film.B. Just the right amount of adhesive, it can be re-positioned.C. Can be trimmed easy with a box cutting knife.D. Can be heated and ever so slightly shrinked to fit.E. Color is perfect, nice and orange, not a faded yellow or light orange, this is a rich dark orange once applied.CON:A. Wish I got more for the price.B. Once you peal it off, don't get it dirty, it will not come clean.OTHER:A. Small sheet, it is exactly 4X8, so make sure you measure before you buy.

Not sure about who packaged the product.Although it was packaged with other items and folded with diagonal crease when it arrived, it applied as should by directions. The crease caused an air bubble that I haven't been able to remove as of yet.Other than packaging and shipping, Hats off to Lamin-x for awesome product!

All in all it is a most wonderful product. The film is nice and thick, the adhesive has a pretty good "grab" to it ( I applied it dry.) Docked a star though because A. For the price you really should get more, but it really is a quality product, and B. It showed up folded. Luckily the film was not creased and looks pretty nice on my fog lights.

I put this on my side-makers for my car. It is durable, as advertised. But you can get bubbles. You need to stretch it as you apply it. Some say to use heat, but I didn't. Maybe I should have.Some people said a single layer did not provide deep enough color, but I think so. At least for what I'm looking for. I bought enough to do two layers, but I only used one layer.My side markers are right at 8" long, so this was barely long enough, but indeed it worked.My car, a Mazdaspeed 6 2007, came with conventional amber side markers with a standard bulb. I decided to upgrade them with some LED side markers. Not just replace the internal bulb with an LED bulb, but rather get some aftermarket side-markers that have an internal LED strip running the length of the reflector. When illuminated, they have a modern look. The thing is, I could only find them in smoked or clear. I want it to look basically stock when the marker is off, amber. So, I bought clear ones and used the Lamin-X. 10 bucks seems pretty pricey for a 4”x8” sheet of tinted plastic. But it is good material. And I got the look I was looking for. Basically stock look when the marker is off, modern look when on.

Awesome product that seems to be the manufacturers pride for the price

Just What i need