OVV3D Wood PLA 3D Printer Filament Bundle,Over 30% Real Wood Fiber,PLA 1.75

I bought the OVV3D Wood 3D Printer Filament Bundle because I wanted to try printing some custom "wood carved" objects on my 3D printer—and I’m really impressed. The filament ran cleanly through my Prusa Mini with no clogs or stringing, which is always a concern with composite filaments. Each roll had a unique wood tone that added great variety to my prints without needing post-processing. The real magic is in the finish—printed parts come out with a subtle matte texture and wood-like appearance that looks great straight off the bed. I used it for a few decorative models and even a plant pot sleeve, and every piece has that organic feel I was going for. It doesn’t have that burnt smell some wood filaments give off either, which was a pleasant surprise.

This prints out beautifully! The rolls are small enough that you don’t have to make a huge investment to try them. But they’re big enough to make something nice.

Beautiful texture and colors that printed well on a Bambu X1c and a .4mm nozzle with the default bambu wood pla filament profile. I did have one event when using top surface ironing where the filament almost caramelized in a streak but I was running some interesting settings in the slicer. Photos of my clock are of this filament at .12 layer height, no ironing but a lot of slicer tweaks. Exceptions being the center hub is a matte pla and the clock hand stems are matte black pla. No tangles or issues, although an adapter spool to use in the AMS is a required print.

I had total success using .6mm nozzle and only printing decorative non-structural sections of this project. This custom picture frame is mostly basic brown PLA with the OVV3D Wood (Redwood and Oak) fused nicely on the upper layers. It feels and smells like wood! Very nice! I like this filament, but it is rough, inconsistent, and makes fragile prints. It may clog .4mm nozzle too easily, so stick with .6mm which allows a lower nozzle temp of 190C. Dry it well before use, even fresh from the package. So, print only decorative surfaces and you will be fine. Print structural stuff with basic PLA first and layer on the OVV3D Wood filament or print separate pieces for gluing on later. That will save costs too - print only what needs to visibly wooden and you'll be fine. Not for beginners.

I’ve seen mixed reviews but wanted to give it a try ourselves. It works well but you need to be sure to dry it first! The wood PLA adds a realness to the prints that makes it look like actual wood! The patina from wood is hard to capture but this does a decent job!

Very inconsistent filament quality, extremely brittle in some parts even after drying. Cloggs the nozzle and failed 3 prints in a row. The objects that do successfully print are noticeably more fragile than all other PLA products I've used.

Let me first say this is the first filament I've ever bought that has wood in it. I definitely was new to this and this filament was my intro to the world of infused filaments. Now, I've had both really good and really bad things to say so let's start off with pros. Pros: Has a great finish when it prints (super smooth and layer lines are almost invisible. Seems like that's the wood fibers filling in the rough print edges) as well as the feel and smell. When printing my room smells like a lumber mill and the print itself feels like a peice of wood that was rough sanded. Really authentic stuff. Cons: This filament is VERY brittle, even when dry, so be gentle when loading it and make sure your printer settings accommodate for a softer filament. On top of this, the filament is also very susceptible to heat creep. In a 4 hr print, I had to remove my bowden tube off of my ender 3 and load in a new section of filament probably 10 times. I've found that a lower temp allows the filament to soften but still maintain rigidity up until the nozzle so keeping it at 190C helps alot with preventing heat creep. Also the clogging is a menace! Lower your speeds of printing and it should be fine which will allow the fibers to travel with the filament rather than get clogged in the nozzle (this filament makes a lot of clogs if you dont know what youre doing). What I found is if you follow the manufacturers settings and use the lower threshold, the greater success you'll have with this filament. Also your prints will be VERY soft so do not print this for strength, only for show. Overall it's not horrible. Would I buy again? Probably not given the troubles this filament gave me with the brittleness amongst other things and also the value for the money isn't great given that you can buy a 1kg roll of some other brand for some more but who knows, maybe as I continue to use it, ill change my mind. This filament definitely isn't for beginners starting 3D printing though.

This is the real deal - you can actually smell the wood fibers when they heat up in the extruder..