The Shopfitting Shop 5 Tier Boltless Garage Shelving Workshop Storage Racking Shelves Heavy Duty Metal 1800 x 900 x 400

Initial thoughts on opening the box was, this looks flimsy. Easy to build, only took 20 minutes and is stronger than I thought it would be. If building to full height I would recommend securing it to a wall. On the whole a good set of shelves for the low price.

As I was taking the bits out the box to make sure it was all there (it was) I wasn't very impressed as it was all very flimsy and the shelves just 4mm thick, so thought that it wasn't going to be any good.But, I decided to start putting it together and the more I did the sturdier it got, not brilliant, it is very thin metal, pushed/clipped together and wood after all, but it will certainly do the job I need it for in the garage, holding all my none to heavy DIY power tools and bits and pieces that one collects over time.I'm glad it had cross pieces for each shelve otherwise I would have returned it, these are a push fit, no bumps like the rest, which would have been better. I shall probably add a stay at the top just in case it decides to tip over.

Can be seen as a but flimsy but we have plenty ty on it and it's holding the instructions could be a little more clearer.Great value for money though and cured a storage solution that could of cost alot more.

Just bought the product and it's very flimsy but I'm guessing that's why it's cheap. The worst thing of all is that the instructions to build are non - existent at all & this will cause most people some problems. If you don't click the frame into place, properly( not straightforward ) it falls apart and the metal frames bend very easily. All it needs is proper pics with detailed instructions and also the feet attachmnets fall off very easily. It's also a shame that there is no real true reinforcement of the frame. I eventually got it assembled and up in my garage. I'm now going to try Tufferman's pro shelving range next.

Seem flimsy until all assembled and shelves in place. Make sure all bars are properly locked into place.Very easy to make and great storage.

I purchased 4 shelving units but when it came to putting it together I found that the metal could be bent in my fingers & had no strength, the shelfs were made of MDF & were only 31.75 mm yet it was advertised as a heavy duty ,that was a joke!I sent back the units for a full refund!

We have a small outside shed but we really wanted to make use of the space inside and like most people, all of our stuff was sat on the floor with so much unused space above. So we looked for some storage racks and decided on these. They were reasonably priced and arrived very quickly. In truth we ordered x2 sets but ended up returning x1 set because the first rack did such a good job! We got so much gear onto the shelves (which we could position wherever we wanted) and it solved the problem of storage, so we had no need for a 2nd rack which we sent back to Amazon with ease.These are solid and heavy but they go together very simply without the need of any tools. Just take a few minutes to ‘see’ how they slot together and you’ll be fine. There are no screws or nails but this hasn’t hindered the stability. They can also support some real weight (like a circular saw) with no problems.Like I said, we’ve placed the shelves where we wanted and we’ve managed to free up so much space. I’m so glad we got this rack and if you’re needed some good value, strong, easy to assemble racking then I can out fault these!

Bit daunting to put together, but seems sturdy and just what I needed.