Carburetor for 300E 450E 500E 550EX 500 125cc 140cc 08P502 8P502 09P602 9P602 Lawn Mower Engine Replace OE # 799583

I purchased an inexpensive push lawn mower from Wal-Mart last year. I do not know if it was bad gas or the carburetor got gummed up. Even with starter fluid the engine would not start. I was going to purchase an OEM carburetor, but they are like $50 to $75. Thats almost 2/3's the cost of the mower. So, I tried this non-OEM carb, and it works great. It works so great that after I installed it, primed the carb 7 to 10 times, the mower started on the first pull. To this very day, it still starts on the first pull. I always try to go OEM for most of my lawn equipment, but this carburetor had the same fit, form, and function as the OEM, plus I think it was 1/2 the price. I highly recommend this carburetor. Simple to install, the mower runs great and appears to have the same quality as the OEM. 100% satisfied.

Perfect fit. Runs great!

This carburetor fit just like the OEM one and look like the same quality of the OEM. This was simple to change, I remove the gas from the tank and unclamp the fuel line hose. Remove the four screws that hold on the carburetor. Wiggle off the old carburetor, removing the fuel line. You can use a large Allen bit to remove the bowel on the carburetor or once the fuel line is off turn the carburetor sideways to empty the bowl. Slip the replacement carburetor on and the crankcase breather tube and remount the screws. Once I put the fuel back in the tank, I allowed it to sit for a bit and then primed it 5 times, and it cranked right up. I think it actually ran better than the original carburetor.

We have the blacked out Murray with the E450 briggs & stratton motor. Threw this bad boy on, primed it prolly 15 times to get some fuel up in the carb and she fired right up. Don't fight with cleaning the old one, just buy this one. Took like 15 minutes to dump the old gas, rip the old one off, install the new one, and refill the tank. 10/10 zero issues.

Perfect fit and started the first pull and my mower hasn’t run in 2 years!

It works as expected only reason not giving 5 stars is because It hasn’t been a year since I bought it I’ll revisit this item again once a year past and change my review as necessary but other than that has worked perfectly fine and easy to install

Perfect fit

Installed this carburetor and the mower started on the first pull. Couldn't have worked any better. I used to work on motorcycles professionally and had no problem removing the carb from the mower. I had already replaced the plug and the fuel line and it still wouldn't start. I removed the carb and blew it out with some carb cleaner and the compressor. I got it all back together and it would only run while squirting carb cleaner into the air filter. I didn't want to put the plastic body in carburetor soak, so I looked online to see how they clean a plastic body carb. That's when I found this one. For less than $20 and being plug-and-play, it's a heck of a deal. Save time and money and just replace the carb of your mower has been sitting.. well worth it!