Luceco LED Mosi Round Bulkhead, Emergency Driver, 20 cm, 7 W, Black

This is an excellent compact LED bulkhead luminaire (not dimmable), that is very good quality, and perfect for smaller areas, where a high level of illumination isn’t required.The fitting (7W) has an illuminance output of 735 lumens, which is pretty much equivalent to 40-50W incandescent. This luminaire is very easy to install, either surface wired, or via a flush conduit box etc. A really nice touch is that whilst round, the side conduit entry points (if required) are flat, thereby ensuring a neat and effective coupling (or of course M/T abutting). Very well thought out.The body of the bulkhead is very good quality polycarbonate, with a nice even opal diffuser (4 x fixing screws), which also has a recessed gasket for a good seal. The bulkhead (chassis, driver, LEDS etc), is very easily removable, utilising a simple plug and socket arrangement, which allows easy wiring into the terminal connectors in the base. Once you have wired the fitting, you’re able to easily plug the main chassis back in, place back into body, and replace the diffuser. Simple and straightforward.There are (20mm) cable entry / coupling points on each side, and underneath, which you just drill out as required, each one having a centre pilot guide for ease. Fixing points (various options, including for mounting direct onto a flush or surface conduit box) are similarly just a case of drilling out.This is a nicely made, well designed luminaire that’s suitable for various locations (internal and external, since it is IP65 rated). The Bulkhead colour temperature is 4000K (daylight white), making it suitable for any application.Overall, this a very decent quality luminaire, that’s well - made, and good value too. Recommended.

Terrible product, Water Ingres, fitted and subsequently checked after my complaint by an Electrical contractor - try to resolve with Bradford, waste of time, fobbed off, poor response, rubbish customer service. Do not buy from this seller, does not respond. The manufacturer is as bad also, avoid this brand. Amazon customer service also poor in my dealings with this matter.

This light was larger than I anticipated. It measures at 29cm (11 inches) and is more suited as an outdoor light unless you have space for it as a wall light or overhead.The light itself is encased in a plastic like polycarbonate material, making it not the most durable material under stress, therefore if you have a concern for vandalism, it may not hold up to considerable force. I would advise installing it in a place high enough where nobody can reach if you consider using this outside. It may or may not hold up during high pressure windy weather, just ensure that its installed tightly enough.The light is however IP65 dust and moisture proof, meaning it can be installed in bathrooms and outdoors. It is also very lightweight only weighing at 599 grams.The light itself is very bright, illuminating at an output of 11 WATTS of power at a rate of 1150 lumens which makes for a perfect security light, lighting up dark pathways or garages. When installed it in the bathroom it looked very stylish, matching most modern furniture in the interior of homes as well.I found setting it up quite complex as the instructions were unclear. Installation was made harder as there are no pre-drilled holes in this model, but suggested indents which are premarked. It also contained no mounting screws suited for outdoor use.I won’t go into details about installation as other reviewers have done a better job, although while simple, the installation would be difficult for the average person.Overall the light is great for its intended purposes, but due to the ambiguity of the instructions and lack of mounting screws, I can only rate it 3 stars.

Delivery great and lights are working well

Very easy to install; drill out the holes you need, fit it in place, wire up and you're good.The front portion (with all the LEDs) comes off as single piece, connecting electrically by a snap cable. This is very handy as it makes fitting the back plate super easy because there is literally nothing in the way to have to work around, just a big old space. Once you're done, snap the cables together - they'll only snap one way so you can't get it wrong - and tighten up the corner screws and you're good to go....almost.There were a couple of things worth noting.1) Although there is a rubber gasket around the edge, you will need to run a cable into the box somehow. The only way to do this is by drilling out holes. You'll need to silicone the holes up again if you're interested in a watertight seal. The same goes for the screw holes at the back. Once you've done this you could more or less submerge the thing, it seems very water tight.2) There are mouldings for a fitting to lock the supply cable in place, of a similar design to that used in household sockets, however no fitting was supplied. It's not likely to be an issue as you won't be pulling on the cable as you would a plug socket, but something to consider for your cable run design.In use, it's a nice 'clear' white light, and as bright as you'd expect from one of these units - easily bright enough for my shed(!).