PrimaCreatorFlexPlate-Powder Coated PEI 165 x 165 mm

After a while of gently pulling prints off the stock bed with a few broken attempts I decided to purchase this bed.Works perfectly and both pla and petg.Has really good magnetism so the bed snaps down if your not careful.Been using the textured side only and so far had no bed adhesion issues.

The Textrued PEI side is of great quality and always works for me, not so much on the smooth side but I've never had luck with smooth PEI other than on a prusa machine

I've been using a smooth PEI bed for a year, which worked okay but was showing excessive signs of wear so decided to try and upgrade. When I noticed Prima also make printer beds (I've been using their filament with great results) I had to check it out.The adhesion is the best I've had, I'm yet to have a print lift. The texture is a little courser than I expected but I kind of like it. The steel is super thin and so easy to pop prints off. Cant really say much more other than how happy I am with this bed.Just to note: I'm printing with PLA and the bed is set to 60 degrees.

Marked position of bed mounting screws that will be below magnetic base, and used a punch to remove material for subsequent access to bed screws after fitting. Plate works very well indeed

I have these flex plates on 4 printers and would recommend to anyone. PLA and PETG sticks well and releases when cooled down. If I need extra stick I use 3d lack spray.

Great product! Best I've had 😀

Perfec to replace that crappy bed it comes with

Works ok as a build plate, PLA, PETG and ABS all adhere well. I print some items which the first layer is seen and the powder coating textured thickness is not as deep as some other build plates I have, changing the visual appearance.

Jätte smidigt att använda och helt klart en uppgradering

Utilisation pour améliorer une imprimante non équipée d'une flex PlateLa plaque est de bonne qualité et la base collante est très bonne.Pas de problème en ce qui me concerne.

Super produit,Decolage des pieces apres impression tres facile. tres bonne adherence.Je recommande vivement

works perfectly. only tested with ASA so far

The media could not be loaded. Een echte aanrader voor 3D Printer fanaten, een zeer goede hechting en gekocht voor ASA / ABS filament maar doet het ook heel goed met PLA, PetG, TPU en maak deze plaat alleen maar schoon met 99.9% alcohol en blijft goed zijn werk doen.Voordat je de magnetische plaat monteerd op het bed plakt teken de boutgaten goed af op deze plaat en sla met een slagpijpje de gaten in deze plaat zodat de boutkoppen van je Alu bed er altijd doorheen kunnen.De doorwarming is ruim voldoende als je toch tussendoor een keer op glas wilt printen.