VIVO Height Adjustable 17 to 32 inch Single Monitor Articulating Wall Mount for Standing Workstations, Fits 1 Screen with Max VESA 100x100mm, White, MOUNT-VW01AW

its very good and strong

The best I’ve bought in a while

Heel handige monitor-muur-mount-plate (!) In hoogte verstelbaar (+ kantelen , tilten , draaien) & geeft (zoals in mijn geval) meer stevigheid (door groter verbindingsoppervlakte) aan de Gyproc-plaat , waar de monitor op bevestigd moest worden.

As per instructions, for height adjustment, the monitor must be lifted to the top position in order to slide down to the lowest peg. Doing so allows the ratchet mechanism to engage so that the bracket height can be adjusted upwards in increments. This also means you must ensure that the monitor has sufficient clearance to be lowered to the bottom position of the mount. Material is sturdy and various screws were provided for VESA/wall mount as well as drywall plugs.

Mounted it to my wall, monitor feels sturdy, rotates easily. Tilting isn't that great, but there is still some ability to angle it. Raising the height can be slightly annoying as you have to raise it to the top, then lower it all the way to the bottom again to reset, however, it still works.

I was looking for a slim monitor mount that would hold the monitor as close to the wall as possible since I have a small space. This one puts the screen about 3 inches from the wall (of course this will vary a bit depending on your monitor). The tilt, angle, and rotation adjustments are very easy once the monitor is installed. The up/down adjustment is easy enough but, due to the design of the locking mechanism, it can only move upwards, that is until you reach the very top, then the locking mechanism disengages, allowing you to move it downward again. Starting to move upward re-engages the locking mechanism. So it's a little bit annoying and tricky if you wish to move the monitor down by only a single notch or two. But you should only need to do it once and then you're set. Note also that this mount has no side-to-side adjustment at all, so you need to be very careful to drill your holes in just the right spot if you are particular about where you'll want your monitor to be horizontally. But other than that, installation is very easy, the instructions are good and clear. Other reviews have mentioned that the provided wall anchors are cheap and breakable, but mine came with very large white plastic "screw in" style of anchors, very sturdy. Highly recommend!

Très bien, mais il faut vérifier que rien ne gêne au niveau de votre écran. En effet, quelle surprise de voir que mon écran avait deux bosses en plastique pour le pied à l'endroit où le vesa prend place. Heureusement j'ai pu meuler le métal pour créer l'espace nécessaire pour que ça passe. Aussi, il a fallu "forcer" un peu pour que le système fonctionne bien : il faut aller tout en haut (mais vraiment tout en haut) pour que le loquet rentre bien et permette d'aller tout en bas (mais vraiment tout en bas) pour que le système se remette en place et se crante à chaque étage. Photo ci-jointe. Une fois cela compris et résolu (bien enfoncer le super écran dans le u du support mural et bien visser la sécurité), système super pratique et qui permet non seulement de régler verticalement, un peu d'orientation et on peut pivoter son écran à 90 pour faciliter les branchements par exemple. Donc au final, je conseille vivement, pratique et peu cher.