Bsrezn 200g UV Resin Kit with Light, Crystal Clear Solar Activated UV Epoxy Resin for Jewelry Making (100g x 2)

Did really well. The more you put on an area the longer it takes to dry but still quick drying compared to other resin. It’s really hard, I didn’t have any bubbles big or small. The thickness depends on how much you put on I would recommend a thin layer, curing, then adding another layer to avoid the longer curing. There was a slight chemical smell at first but was gone in a second. I’m going to try to file/sand and see how it holds up. So far heat and water proof. I haven’t tested it in an oven or anything but it is impossible to get off once you put it on something and cure it. Be warned! I also got some isopropyl rubbing alcohol for clarity, it seems my project wasn’t entirely dry, as it stuck to my hands. It didn’t transfer resin to anything, it was just tacky. Stuck it under the light and wiped it with alcohol, which stabilized it.Extremely happy with this product, thank you!

I love this resin a lot. I’m write a honest review because when it comes to buying stuff like this people really like to read up on it before choosing their final choice. Like me I read and review sooooo many different brands before I buy. I read sooooo many before buying this brand because this was my very first time ever using UV resin. Really resin period. I used regular kind before in the past like once or twice. This brand here does the job! It hardens like it says for the most part. I found though with using this lamp that comes with it if you hear it for 2 min it comes out perfectly hard and not tacky. When I’d heat below 2 min it would have this tacky feel and leave prints or surges and become cloudy. Then I’d have to add more. It is thickish. Specially whe. You get to the bottom of the bottle. It becomes REALLY thick and you have to use more to get it spread out more evenly. And when your at the Hinton of the bottle you need to heat it for like 2min and 15/20 seconds. It’s like it takes longer to cure for whatever reason. It really doesn’t turn yellow after either. That I have seen. It is a pretty clear resin even after it’s cured. There was a few pieces that did darken some but not dramatically. I love how the resin brings out the sparkle, shine and shimmer of clays that have that. Also when you add glitter or shimmer it really brings out the shine. Over all it’s a great resin and it will be my go to when I try others and don’t like it. I did buy some new kind this round just to see how it does so I can find the perfect one for me. I posted a few photos of the resin used on my earrings. I also used one photo where there is white paint underneath. And the one with the star the yellow kinda dulled. Which was odd to me. So did the green. It didn’t really enhance the vibrant colors like they were. Oh note to add!! This gives very few to no bubbles. But if you do get bubbles just take a lighter and swirl over the top of them and they disappear. Or a heatgun will work too. Don’t let the clam touch it but just run it across the tips bout 1/2in-1in away. They will disappear when you do so.

So grateful this kit exists! The resin doesn’t bubble unless you try to squeeze too much or reach the bottom of the bottle. No strong odor or excessive runniness. Crystal clear hardening after 90 sec under this SUPER DURABLE UV lamp.

The media could not be loaded. I absolutely f***ing love this. I've been getting better at it but i happen to be trying to bedazzle everything in the house.Pray for my husband. XDCures very quickly. Perfectly clear! No smell! It cures so quick so ... no room for mistakes...

If you’re looking to start a junk case business or some type of business that includes resin glue. This is the best starter kit. It has carried me for the past month and half. The cure time is like 30s. It’s easy to clean. It’s also so easy to use. The lamp only uses a C charger and you have to keep it on the charger for it to turn on and work. The thickness is just right. The bubble size is great.

This stuff hardens fast!! Even when you don't want it to. I recommend not doing it outside lol or at least, not til nightfall. I had poured it into a cap to use, and that hardened without the little uv light. My paintbrushes are now plastic too lol The uv was very high here at the time, so maybe that's why (I'm in south Florida)100% works. But it can absolutely get bubbles (the cap that hardened has them) I used it to fill bubbles in something i bought and to smooth it out. So my application didn't lend itself to bubbles, but thicker pours might.

Warning!!! The UV light is 5" w x 4" d. The picture is very deceiving. Don't be fooled thinking that the light is large. From the other reviews it appears the resin works just fine. I guess for the price you get what you pay for.

This kit is super easy to use! I’m a newbie to resin, and this had me up and running with it super fast! Highly recommend!