4PCS Car Windshield Wiper Blade Strips, DIY Silicone Car Frameless Window Boneless Replacement, Auto Adjustable Insert Rubber Wiper Blade Refills, Universal for SUV Truck Van

The 4PCS Car Windshield Wiper Blade Strips, designed for DIY silicone car frameless window boneless replacement. Here's my comprehensive review of these wiper blade strips that promise to keep your windshield clear and provide a hassle-free replacement experience.Easy DIY Installation (4.5/5):One of the standout features of these wiper blade strips is the ease of DIY installation. The silicone material is flexible and easy to work with, allowing for a straightforward replacement process. The absence of a traditional frame adds simplicity to the installation, making it accessible for users with varying levels of automotive expertise.Silicone Material (4.5/5):The silicone construction of the wiper blade strips contributes to both durability and flexibility. The material is resistant to harsh weather conditions, ensuring a longer lifespan. The flexibility of the silicone also adapts well to the contours of the windshield, providing effective and streak-free wiping.Wiping Performance (4.5/5):In terms of wiping performance, these wiper blade strips excel. The silicone material provides a smooth and quiet operation, effectively clearing the windshield of rain, snow, and debris. The even pressure distribution ensures consistent and reliable performance during various weather conditions.Value for Money (4/5):The inclusion of four wiper blade strips in the package adds value, especially considering that it allows for replacement of both front and rear wipers. While the initial investment might be slightly higher than traditional wiper blades, the durability and performance justify the cost.Overall Impression (4.3/5):The 4PCS Car Windshield Wiper Blade Strips offer a compelling solution for those seeking an easy-to-install, frameless, and durable option for their car's wiper system. With a focus on functionality and a sleek design, these wiper blade strips provide clear benefits for drivers looking to maintain optimal visibility on the road.In conclusion, if you're in the market for a DIY-friendly, silicone-based windshield wiper replacement option, the 4PCS Car Windshield Wiper Blade Strips are worth considering. They combine ease of installation, durability, and effective wiping performance to enhance your driving experience, especially in diverse weather conditions.

I'm used to paying $$$ to replace wiper blades. Then I stumbled across a few TouYube videos and OMG these things are fantastic! No streaks and they seem better quality than the old ones I replaced. I placed my first order and gave one set to my uncle. I put mine on my Camry, which unfortunately had safelite blades=nightmare. Once I brute forced them open, the rest was embarrassingly easy. My car and my truck each have different blade lengths on each side. They have to be cut to length. Just install the wire ribs, slide it in place and cut off the excess with a knife or scissors. Mine had a cap t reinstall. Hopefully, yours is different. I can't believe I spent hundreds, maybe thousands of dollars over the years on wipers! Too inexpensive to not keep an extra set laying around. Great product!

Amazon gave me a confirmed fit for my Honda, but they lack a bulge on the ends or any way to secure them in the blades so they don't slide out. Bad on Honda for making their refills proprietary. Worse on Amazon for confirming these as a fut for my vehicle and wasting my time. I returned them.

Purchased these refills expecting an OEM fit. They ARE NOT an OEM fit. The refills are thinner than an Acura OEM blade and, as such, the metal inserts within the refill are not held tightly. On a recent trip from Arizona to California through an extended rain storm, the metal inserts moved out of the refills causing the refills to dislodge from the metal wiper blades. We had to pull over in the rain three times to adjust the blades. The refill size created a very dangerous situation. For safety’s sake, purchase an OEM blade.

I remember when you bought just just the blade replacement not whole wind shield wiper assembly. Didn't know the still exist. Value is great. Much better than paying 35.00 on up. These were like 4.00 a piece.

As a refill, this will not fit the factory 14 inch rear wiper blade on a 2021 Honda Pilot.

I would recommend these

These are perfect. Actually thicker than the stock blades I had on. Fit well and easy to cut with the measurements. Will see how long they last but first action they perform well

Es un buen producto ya las instalé en mi vehículo y limpian bien las gomas recomendado llegó en tiempo y forma el producto

4PCS Car Windshield Wiper Blade Strips, DIY Silicone Car Frame-less Window Boneless ReplacementBought Jan 20 2024 now Aug 2 2024 Installed on Subaru 2019 Forester Perfect fit. Once you learn how to remove the old blade strips on a New Boneless Blade system it is so simple to replace. Much cheaper than the rip off dealer price for blades. Always best to use the original factory hardware and just replace the blade.Good to have a backup set of blade strips in your vehicle so not to get caught without wipers.I will buy this product again.These boneless wiper blades are installed in a small track.Note: Cut new strip to the same length of old strip once removed not any longer.To remove old strip use a very small Flat screw driver just carefully slide back the old strip from end of blade hardware it will move just enough to insert the screw driver under the end of strip then work the strip up and out of the grove or track; once a little of the strip is up just pull on it to remove the rest of the strip it will slide out and insert new strip in reverse use the screw driver to carefully work the end of the new strip back into the track were the old strip came out and slowly slide strip back along the length of the track as the old one was.As you pull out the old strip take close note as to how the lowest fin holds the blade strip in the track you will install the new strip the same way carefully work the new one in with the screw driver once started just slide the rest of the strip in the track no driver needed.This boneless blade system is great. Once you have done one the the others blades are very easy to do.If the rounded plastic end of the wiper hardware came off this job would be even easier but on the Subaru they did not come off I was afraid of braking it.

Took a gamble on these after seeing the negative reviews... But I was not disappointed.Do be aware they come as a pair. Meaning two sets of two blades are seemingly glued together (see picture). Simply tear them apart as you would cheese strings. Should tear right down the middle with no issues.These do NOT come with the metal rods for extra rigidity. Either reuse your own like me or get them elsewhere.They are a little bit more thick in the area that goes in the wiper blade holders, but you can fit them with a bit of persuasion.The way I did it, is that I took the rear wiper in my hand (I tried while it was still attached to the car, but that was a mistake as it made everything so much harder) and inserted the blade without the metal plates in. Tried with them in it and the rubber just refused to go in.Slid the blade strip all the way through and once it was in place, I slid in the metal rod/plates through one of the end side to provide structural rigidity to the blade. I used my keys to push them a bit further in and get an equal distance from the sides.I don't know if my wiper is OEM since I got my car used earlier this year, but I have a Mazda CX-3 GS AWD 2021 and it worked.Using calipers, I checked everything.Dimension wise, my old blade was about 2.9mm for the bit that goes in the holders of the wiper. These are closer to 3.4mm. Hence why it is a bit harder to squeeze in. But the area for the metal rod is also larger, which lets it squeeze easily. (see picture of the side by side. Red arrows to show the part that goes in the blade holders of the wiper. You can definitely see how much larger it is.)Width wise, old ones were 5.6mm while these are 5.8mm. Barely noticeable difference.Height wise, they are relatively the same as 10.6mm. Give or take 0.1mm due to rubber flex.Overall quite satisfied. For the price I paid, I can replace the blade multiple times. Much cheaper than buying a whole new wiper.All in all, took me about 10 minutes from the moment I received my package from amazon to installing it.I will update my review later IF I find they are lacking the next time I am out and about in the rain. If there's no update, assume I'm happy and these do their job.

Muy buenos limpiadores, a la medida y fácil de ensamblar.De buena calidad!

They should be easy to install on most types of wiper blades. However, if you have a blade that looks like the image, it can still be done, but you will need to take the entire blade apart. The rubber is locked in position in the center of the blade support. You need to remove both end caps. then the slide retainers. Then both of the center support caps. Then you need to knock out the plastic pin that holds the main blade mount to the body of the blade. Then remove both metal strip lock plates. Then you can replace the rubber inserts.Its not that hard to do it you just need patience and look at the system carefully to see how they come apart. Take your time so you don't brake any of the plastic. Took me about 25 minutes to do the first one.Can't comment on how good they are yet, haven't been in the rain yet.