33Ft Universal Self Adhesive Weather Seal Strip for Car, 51/100 Inch Wide X 1/5 Inch Thick, Auto Door & Window Weatherstrip with Engine Cover (2 Rolls, 16.5 Ft Each)

Works great. Easy to install. Used this on my Tesla Model Y juniper.

I’m not going to lie I was extremely skeptical when I bought this roll as I didn’t think it would stick at all. However it sticks just fine. Like way better than I expected. I put these on my front two doors and wow no wind noise and my car is better insulated which is super nice. I’m planning on ordering another two rolls for the rear doors. I would say order two or three rolls if you’re planning on doing all four doors plus trunk and hood jams. I would recommend this product especially to the people with some what older cars as the older rubber starts to deteriorate.

Shipped on time and in neat packaging. The width was perfect for my application and the adhesive on the back seemed legit and quality. It stuck very quickly to the metal that I was adhering it to. Time will tell though if the seal strips stay in place and last through the harsh seasons. For now, they look great and do the job I wanted them to do. My only negative is the manufacturer only gives you 1 adhesive pad per roll of seal strip...so each package comes with only 2 adhesive pads which is not enough. When you open the adhesive prep pad, you have to apply it quickly because the chemical on the pad evaporates fast. Once applied though, it works great, but you have one quick pass to do and then apply the seal strip material down. There are times you have to either work slow on laying down the seal strips or cutting them to use for another area and you either run out of adhesive prep pads due to evaporation or simply not enough pads to use for another application somewhere else. Easy solution for the manufacturer, just give us 5 or more application prep pads per pack of seal strips. The prep pads are the size of an alcohol pad, so not sure I see why more can't be included. Other than that, good product, for now.

This EPDM B-shape weather strip is excellent! I am so glad that I took the time to carefully research the width, height, and compressibility of this B-shape EPDM rubber weather strip. It is the perfect width for our RV screen door jam and it easily compresses from it's normal height of 5mm to 2mm filling air gaps nicely. If you follow these few guidelines, it is very easy to firmly apply in a nice straight line: 1) Insure the surface you're applying the weather strip to is perfectly clean; wipe it with alcohol just before application. 2) After getting an inch or so firmly applied, pull about 6 inches of the red adhesive backing strip loose to expose the adhesive strip and create a slight bend (see pics) and apply the weather strip in a rolling manner... keeping a bend. and pressing it down in spots to secure it as you go. 3) * IMPORTANT * Don't pull or stretch the weather strip as you apply it. Doing so will compromise the adhesion because the EPDM rubber strip will then always be under stress - working to shrink to its original length and form with warming and cooling cycles - and eventually the adhesion will fail. 4) Only pull about 6 inches of the red adhesive protective strip off of the adhesive at a time; don't let it become too long as you apply the EPDM weather strip. It's easier to work with that way. Stay neat, snip off the red strip after it gets about 2 feet long. 5) After you've applied the weather strip, use three finger tips or your thumb to press and release the entire length of the rubber strip to insure the adhesive is securely bonded to the surface it's applied to. Good luck. Enjoy.

Has held up 2+ years on my 2008 Toyota Tundra so far hasn’t gotten loose anywhere and it’s on all 4 doors. It is soft and you can tell a slight difference in cabin noise. It is durable and doesn’t leak.

Excellent quality and service thank you 👍

I bought this to add to my doors due to the weatherstrip/door seals just being aged and not as firm against the door. If you take some time to clean the area you are applying to along with using a heatgun in the areas before you apply the strips, it will adhere very well. I’ve reduced road and wind noise along with snugging the doors up a bit more to reduce any rattle noises that might be audible on bumpy roads. Hoping these due last a while and stay attached, as of right now it works great.

4 star adhesion 4 star easy to install 1 star value for money I purchased this product to try and reduce wind noise in my 1995 Toyota Avalon. The car is quite old so it can get quite noisy with wind noise going highway speeds. When receiving this product, all that came was a giant roll of the weather seal and a roll of double sided 3M adhesive. There weren't any instructions or anything so all I had to go off of on where to install it was with the pictures from this product listing. I intended to keep the car's current weathersealing and try to use this to have extra sealing from the environment. Since my car doesn't look like the car in the example or in the pictures of other reviews, I had to wing it on where to place the weather seal that would make it effective. I applied it where the car door meets the weather seal on the door frame. After my first round of application, I noticed that my car door was a lot more difficult to close, indicating that it didn't fit and was interfering with the stock weather seal. From here, I tried removing the weather seal and replacing it in other areas where I thought it would be effective, noting that the adhesive wouldn't work as well after being torn off (this was intentional just so I could test other areas of the car door and door frame). In the end, I was able to find a position that compromised between maximum sealing and interfering with the car door. I put the weather seal only on the driver's side door and went for a drive to test it. Unfortunately to my surprise, it did absolutely nothing. The driver's side door was letting in as much wind noise as the passenger side door which had no new weather sealing at all. At this point, I've given up on the product and deemed that maybe it just wasn't meant for my vehicle. Nonetheless, for a product marketed as "universal," I was disappointed to find literally no improvement from the product.

Works as advertised...great for vehicle sound, wind, dust proofing.

I prepped the surface by cleaning thoroughly with soap, then rinsing off and a final round of Isopropyl alcohol. It didn't stick. Everything came off the very next day itself. The glue is cheap. Don't waste your money on this.

اصلي واداة ممتاز ومرن وحجم نحيف يصلح للابواب

ممتاز وعازل للهواء وسهل الاستخدام

Compré este artículo porque en tiempos de humedad el parabrisas de la camioneta se empaña, pienso que tiene que ver la humedad porque el aire frío entra al motor se evapora y sale al parabrisas, lo instalé y se redujo mucho el empalamiento que estaba teniendo, voy a revisar que parte no quedó bien cubierta para hacerlo, pero en general pienso que el producto cumple con la finalidad a lo mejor no compre la altura y ancho adecuado y voy a recurrir a parchecitos pero con el mismo producto, no tengo que comprar otro, antes de que compren verifiren altura y ancho que necesitan