🛥️ Safeguard Your Adventure with Style!
The Outboard Propeller Safety Guard is designed for most 9.9-120 HP boat motors, ensuring safety on the water. Made from durable polypropylene, it fits propellers up to 14 inches and includes an installation kit for easy setup. Perfect for marine enthusiasts looking to enhance safety without compromising performance.
Item Package Dimensions L x W x H | 18.25 x 14 x 10.5 inches |
Package Weight | 2.88 Kilograms |
Item Dimensions LxWxH | 10 x 14 x 14 inches |
Brand Name | GHmarine |
Model Name | Prop guard up to 14 Inches |
Color | Red 70-120HP 14“ |
Material | Rigid Polypropylene Plastic |
Manufacturer | GHmarine Parts Manufacturer |
Part Number | PG00140 |
Style | Marine Boating Propeller Safety Cage |
Included Components | 6 sets short bolt, 4 sets long bolt, 1pc 1/3" drill bit, 1pc Propeller Safety Guard |
Outer Material | Rigid polypropylene Plastic |
Size | 14 inch |
Sport Type | Boating Outboard water sports |
K**N
Functional safety
Had rudder/kicker motor potential interference with rudder shear pin “failure”. Perfect solution
M**K
The product cracked after a few outings, but Seller immediately provided full refund!
The product cracked after 4 trips on the water. However, the seller immediately provided a full refund to purchase another one if I desire. Unmatched customer service!!
E**E
Big for 5 hp but make the job
Nice, look big on 5hp but make good job
M**N
Partially safe, but not completely safe
This work well, and I don't expect to run over or through any fish or people, but it seems to me there should be some kind of thin grid covering the front/back of this thing so the propeller cannot be accessed or touched. Granted most harm would come from front to back rather than back to front, but I just thought there should be something there, and it would really do much to affect the propulsion.
S**E
Had to return
Is well made but the required mounting was not going to work for me. The instructions show you must drill holes in the flange on your outboard. I have a new Mercury 50hp outboard and this flange is extremely thin. I am concerned that if we hit something the flange would break on the motor which could be very costly. This cage looks like it might protect the prop, the question is whether the prop would damage the cage or vise-versa. If the cage was designed to wrap around the entire lower section, it would eliminate the concern for flange breakage.
A**R
Material too Brittle
After spending an hour installing and drilling into motor frame this item hit one object and immediately broke apart. Material has no give and is to brittle.
E**E
Looks great but does not work for 5hp
All my engines are 2020 and newer models.The yellow guard worked well on the Honda 15hp and 9.9hp (just barely). It also fit the Yamaha 15hp well. But it was way to big for my Honda 5hp engines. If I had installed it on the engine the prop would hit the guard.The Blue guard fit the Honda 50hp and the Red guard fit the Honda 90 well also.
A**R
Buyer Beware. Buy at your own risk.
A Licensed technician installed GHMarine PG00140 prop guard’s on two safety boats, used in our yacht club sailing program. The very first time the boats were used, both prop guards disintegrated. I could not find any customer service number to communicate how unhappy our club was with the performance of these prop guards.Think twice before buying an unknown brand of prop guard. Especially from a company without a contact number to speak to customer service. Buyer Beware!!!
S**H
Après une heure d’utilisation
J’ai installer comme il faut le garde autour de mon élice de bateau bien centré et bien fixé et après une heure d’utilisation dans l’eau avec une profondeur entre 20 et 30 pied en relèvent mon moteur pour vérifier si tout étais correcte j’ai eu la surprise que tout étais partie très déçue de la régidité du matériel de ce produit
R**.
Full 5 star, just wish it was black.
This is literally the best kicker guard I’ve ever had. Pull a 180° slam the lines and rigger cable into it and have no fear. Nobody of the 6 boats has had a flasher go through it either. Use all the mounting bolts. One broke cuz he mounted it without putting any through the slag and when he left the kicker down and took off after about 15 minutes and some heavy 10’ seas it tore off. Operator error 100% not a defect. I just wish it was not such an obtrusive colour. Please make them in black or some dark colour. They work great and have significantly improved the steering on our 30’ jet boats. Helps a little when the prop comes outta the water on big waves too. Keeps more water surrounding it. Works great on the back troll too. Make some black ones please. Have already reordered spares. They survive dock bumps better than the stainless ones too. Obviously not crash proof but withstand a harder hit without breaking or bending.
A**R
Great
Fit almost like a glove !Minor grindingYamaha 9.9 2 stroke
J**M
Well made but not for 6hp outboards.
I bought the yellow prop safety guard. The main description indicated it fits 5-20 hp ouboards. This should be changed to align with what the manufacture indicates. One review states he did fit it on a 5 hp motor. Not sure how he did that but I would not recommend. I can say this guard is built very well and should stand up to a good amount of abuse, just make sure you are putting it on a 9.9 - 15 hp motor.
R**E
Breaks
This product fit well, but the one side broke, while driving on the way to the water.
Trustpilot
1 month ago
2 months ago