5L of Pro-Kleen Hot Tub & Whirlpool Complete System Flush Cleaner

I used this after seeing it suggested as a fix for white mould (like tissue paper) in the hot tub after being away and not adding enough chemicals. I heard while mould is tricky to get rid of. But I followed the instructions and it worked perfectly. The process was to empty the contaminated water, rinse. Refil and add the solution, leave it overnight for 12 hours if possible at 30 degrees (I also added all the equipment used in the pool into the tub to soak it). ake sure you use the bubbles and leave it with the pump running. Drain the pool and rinse with cold water. Refil with water and run the equipment again. Drain again. Refil and add chemicals as usual (best to do a shock treatment before using). Yes it was a pain but it worked.

If you have a jacuzzi, spa or hot tub, perhaps the least "glamorous part of ownership is keeping the pipework clear and clean, this stuff does a brilliant job of taking care of that side of the deal .Much depends how often you use your spa etc, so the cleaning schedule will reflect on that .However it is pretty easy to use , add the recommended amount for your system , turn on the pump, and let it purge the pipework. Word of warning, dont be alarmed by what comes through those pipes, just be glad you have decided to clean them before they got any worse.

Purchased to flush the tub out after sitting over winter. Seemed to do it's job just make sure u thoroughly flush it out after using or makes ur water foamy.

This truly dissolves all the oil that accumulates in your hot tub piping in between cleans. The water surface will have large globs of yellow fats and dirt within minutes of pouring in this cleaner. It is also economical, with 5L doing 5 inbetween cleans, ie it will last you for a year if you clean your hot tub every 3 months as is recommended.

As always, great service. Thank you

Good product cleans through all the jets and pipes

I purchased this along with a spray cleaner from the same manufacturer for our hot tub, as the water had become contaminated. After mixing the solution with the tub water, I left the jets running for 45 minutes and was astounded at what was flushed out of the paperwork and pump.It removed some very nasty stuff and our tub is now back to its best.

Jets are cleaner lots of foam when using