SE-224-XTS CPU Cooler 4 Heatpipes CPU Air Cooler 120mm PWM Fan CPU Fan for Intel LGA1700/115X/1200; AMD AM4/AM5

This inexpensive cooler works great. It cools 6-core processors with no problem.

This is a big CPU Cooler, From the base of the motherboard to the bumps on the top of the cooler, it is about 6 inches. There is a dual fan version but the single fan version had reviews that rated it just as well. I barely hear it at idle with the case side off but I'm not a gamer and it's cooling an Intel 14500 I5 which has a lower average dissipation, TDP of 65W. But that's what I was looking for, something reasonable modern, less power hungry, fairly quiet and reliable. ASRock Z790 Lightning WIFI Mobo (lots of legacy ports) Mirror raided M2's for the OS, Mirror raided 2TB Mechanical for data, 64 gigs DDR 5 RAM, GTX 1660 Super GPU (older but reliable, nice price , can always upgrade ). Anyway, I'm not pushing the CPU Cooler that hard and for my use it's been delightful but you need the room to mount it. The photo's don't really due justice to how big this cooler is when you are staring at it. None of it has given me any grief.

This thing is great. I put it intoy New server with an I3-12100T on a Z690i Aorus Ultra Lite. I had to take two pinch tabs off (gently, Dremel sanding roll) and it JUST BARELY clears the upper heat sink on the mobo. That piece of paper barely drug through with just a hint of resistance. Performance? The 12100T idles at 26-27c on an ambient of about 72. Temps rise quickly under load but the max I've seen is 47C at a load in the 90's. Fan is VERY quiet surprisingly. Not as quiet as the Noctua fans in the case but doggone close. If you're on a budget or aren't trying to cool something mid to high end, I would highly recommend the 224-XTS.

I bought the ID Cooling SE 224 XTS based on the Canucks review of budget tower coolers pointing out the high-polish base plate and overall quality. Compared to my old Cooler Master cooler the ID’s base plate really is impressive. At the current price the package is pretty amazing: a decent fan, plenty of hardware for both AMD and Intel CPUs, and good quality throughout. Mine is working well keeping my AMD4 3600 at ~32C idle. Installation: again, compared with my old Cooler Master cooler (with its rinky-dink lever clamp), the ID Cooling tower is fairly easy to install and once screwed down it feels solid. I suspect the reviews arguing otherwise may be trying to use the cooler in smaller cases; anything smaller than midtower ATX and you might need to resign yourself to pulling the motherboard to install the cooler. I installed this unit without pulling anything out, not even the GPU. No need for a long screwdriver, though having one made the job easier. Be sure to plug in the SE 224’s fan before beginning the radiator installation or you might be very sorry later. With my MSI X470 board I had to tape the cooler assembly back plate in place until screwing in the first screw of the ID Cooling replacement mounts. The instructions that cover this are OK up until the glaring omission of fan-to-radiator installation. Wire-thin spring steel clips hold the fan to the radiator (see photos), and assembling these would be horrible in a small case with mobo left in place; one side was tricky even in my large case. I can see why some users complain about the clips, but they do work.

Maintains a cool internal pc temp, basic but literally all you could ask for and great for the price

I got this because I didn't realize that the CPU cooler I had been using for many years wouldn't fit my new motherboard. This one is flexible and will fit a variety of motherboard configurations. Mine has the single fan. I do gaming at Ultra graphics settings and it remains cool. If you're going to overclock, you might need one with more fans, but it works well for me.

Good

the heatsink and the fan work great. however, the box i got did not have the thermal paste, i have to buy it separate in order to complete the assembly.

Buen ventilador para CPU

Le manuel est bien expliqué, installation facile, et les températures très intéressantes pour le bruit. Le ventirad est très très silencieux et efficace je l’ai installé sur un i5-9400f en stresse test température toujours inférieur à 70°C et le ventirad a seulement 60%. Pas cher payé, très bon rapport qualité prix. Je recommande

i5-12400F用に購入、このクラスならリテールで充分とは思いましたが結構音が気になったので購入 箱があまり大きくなかったのもあって定番のAK400ではなくこちらを選択しました。 当たり前ですがサイドフローはよく冷えますのでFHD60fps程度のゲーム負荷ではホントにCPU動いてるのか？ってくらい温度が上がらなくなりました。 ちょっと小さめだけど性能は申し分ないですね、満足です。

Great little cooler, was very fun to install too. Very sleek in the pc. Not too loud at all. Definitely worth the price!

Ryzen7 5700g と1700 に使用しています。 どちらも 65wCPU ですが、5700g に関してはサーマルスロットリングがかかります。 室温30℃、ベンチ台にて CINEBENCH10分、CPUファン100%。 同じ条件で 1700 は大丈夫です。なんなら室温38℃でも 1700 は平気です。 安いのによくできたCPUクーラーだと思いますが5700g や同等以上の発熱CPUでフルロード使用を多様する方は、別のものを選ぶか室温管理した方がいいかもしれません。