TV Wall Mount Bracket for Most 13-26 inch LED LCD Plasma Flat Screen Monitor up to VESA 100x100mm and 33lbs with Full Motion Articulating Arms Tilting (13"-26")

TL;DR: You will need either smaller diameter drywall anchors or larger diameter screws to fit in the included anchors if you're mounting on drywall (sheetrock).This seems to be the best priced (and therefore best value) for this style of monitor arm I could find.The monitor arm itself seems very sturdy and is exactly what I had in mind when I ordered it.However, the included mounting hardware isn't quite right. Once I had the drywall anchors in, the included screw would not grab and hold. It would come right out under load.In both pictures here, the included screw is on the left and the one I had to use to get it to stay in the wall is on the right. The replacement screws that I used are about 2-3mm bigger diameter than the wall screws that were included in the kit.On my first try I thought maybe I had made the holes in the sheetrock too big, so I tried again with smaller holes that required gently hammering the anchors in. I could tell the anchors were compressed quite a bit on the second try, but the included wall-mount screws are just a couple of millimeters too small for the included anchors.With the bigger screws in place, I think this should be good to go indefinitely now. If I never update this review after 8-24-21, that means I've will not have had any issue with the arm or the wall mounting.

Great, very cheap TV mount. Currently has a 32 inch vision on it for my daughter's room, my only complaint is they could have done a better job with the TV being able to rotate side to side because of the way the TV mount is bolted to the arm of the mount. It does turn side to side very easily but does the job great otherwise!

This unit is ideal for an ultra light unit I've yet to find, most TVs & Monitors are WAY too heavy for this chinzy construction. Hard to install, especially a Monitor on this unit, I ended up using this for parts alone. I'll never mount the base, it's useless/entirely too light & flimsy. I wouldn't, spend more for a better unit.

Did what it was supposed to

I was installing a 19” flatscreen tv in the bedroom of our motor home and this worked great!

Simple & straight forward installation & instructions.Product is as descibed

Its pretty good for the price. Not easy to install on larger tv's. I mounted my 42 inch tv on it. Doesn't stap or hang in place. Instructions are a joke. Had to mount the bracket on the wall and take out long screw to mount the other half to the back of the tv. Then had to attach back while holding the weight of my fairly heavy tv. Probably better a two man job for larger tv's. I got it done but not easy. Seems a little wobbly but all in all works well for me.

This unit was purchased to mount a 24" LED monitor to a wall. The unit is sturdy enough to hold to monitor. The base plate is sturdy and has a lower mounting hole that allows some vertical adjustment. The price wasn't too bad. However, there is not much adjustment for the monitor. The monitor can be leveled horizontally, but cannot adjusted to plumb. If the wall in not plumb, then the base plated will have to be shimmed so that the unit is plumb to the wall. The worst thing about this unit is the mounting hardware. Cheap metal. The two lag screws used to mount the base plate to a wall stud or made of soft metal and the screw hex heads round over easily. Better is buy steel lag screws at a hardware store and save yourself the frustration. The screws to mount the monitor are ok. Overall, I wish I had shopped a little longer.

Havent install yet but looks good.

Muy bien para monitor relacion calidad precio. Extensible . No tiene movimiento de inclinacion. Yo añadi dos agujeros mas para asegurar a la pared