Kreg SK03 Concealment Screw Set with 5 Sizes

Arrived in perfect condition. Fast delivery. Good quality.

You MUST use the correct screws for pocket holes.

Used these along with the Kreg Pocked Hole Jig System for building an oak kitchen table. Great quality, easy to use, recommended.

these were for my husband and as far as I know he was completely satisfied with them and would buy from seller again

Great starter set when combined with the Kreg 3 Jig, only complaint was that there are no 1 1/2" screws in the set so had to buy some separately.

Great kit to get you going until you work out what size screws you use most.Nice feature is that you can use standard posi or the square head driver.

Used to joint ply drawer for camper van

Bought to go with my pocket hole jig. Enough said.

Bought this for the price, and they work great

El producto llego en Perfecto estadoElMaterial de maletín y la calidad de los tornillos sin excelentes.Se los recomiendo mucho

Great assortment but of cos if assortment set, the price must be attractive. Kreg never fails when you wanna do pocket holes...

Here is exactly what is in the box:NOTE: The product description says the screws come "in five sizes." That's a bit misleading; it sounds like you are getting five different lengths. You are actually getting only THREE lengths (for three sizes of stock); two of the lengths come in both course and fine threads. So you get five varieties, but only three lengths.Course threads are for use in soft woods (pine - including hemlock, MDF, particleboard, etc). Fine threads are for hardwood (maple, oak, etc).For 3/4" stock, 1.25" long screws, bright finish: - 150# SML-F125, Maxi-Loc head #7 shank, fine threads, for 3/4" hard stock - 150# SML-C125, Maxi-Loc head #8 shank, course threads, for 3/4" soft stockFor 1/2" stock, 1" long screws, bright finish: - 150# SPS-F1, Pan Head, #6 shank, fine threads, for 1/2" hard stock - 150# SPS-C1, Pan Head, #7 shank, course threads, for 1/2" soft stockFor 1.5" ("two-by") stock, 2.5" long screws, Blue-Kote finish: - 75# SML-C250B, Maxi-Loc head, #8 shank, course threads, for 1.5" soft stockMaxi-Loc heads have a molded-in "washer" which increases the surface area of the head compared to the Pan Head variety. All screws use the same size square-bit driver."Bright" finish means electroplate-galvanized zinc. This finish won't stand up to long term exposure to adverse weather. Blue-Kote finish (used only in the screws for 1.5" stock) is weather resistant. As the name suggests, these screws are blue.The case is sturdy and should last for years, and it REALLY adds a lot of value to the kit. The locking tabs are nice and tight - if you drop the case it is unlikely to pop open and mix up your screws on the floor. My only complaint is that the case does not have a provision to hold the square-drive bit. A "bit compartment" would make it a little more useful (and an included bit even more so - an extra bit would be a nice bit of insurance).Kreg OEM screws are the highest quality. You should always set your drill clutch to a reasonable torque (not much more than it needs to be for your stock), but you are unlikely to twist the head off of these screws or strip out the square socket if your clutch is too tight.I'll be buying a bunch more fine screws for 3/4" hard stock, which is my most common requirement. The other screws I will need much less frequently, but when you need an oddball screw, it's a bummer to not have it. The set makes no attempt to include screws for REALLY oddball stock sizes (how many people really use 1" stock?)This is a good and generous assortment of high-quality screws for the most common stock sizes used in cabinet-style joinery. An excellent value.(if you find my review helpful, please "like" it. thanks!)

This set came with 5 different screw sizes. Good screws. Nice to be able to buy a small kit like this and figure out which sizes you will actually use before ordering in quantity.