WS2811 IC Addressable Dream Color LED Strip 16.4FT 60LEDs/m 20Pixels/m 300LEDs 100pixels IP65 Splash Waterproof Black PCB Flexible DC12V Chasing Effect for Bedroom Desk Home Decoration

A great alternative to the more expensive LED light strips with integrated controller and very few customisation options. I installed this LED strip behind my monitor to serve as ambience lighting in my home office. · All LED elements are functioning perfectly. They are bright (as expected for 5050 style LEDs) and distribute the same brightness and colour tone throughout the band – I didn’t notice any uniformity issues. The data for colour changing & brightness is very effective, producing a professional output with a good controller! · Extremely good adhesion on the smooth plastic that I cleaned with an alcohol wipe. · It comes with 3pin JST-SM connectors on both ends, which means that these can be chained together by connecting the male connector of one strip to the female connector of other. Once connected they are logically one big strip and power and data fed into the first strip is sent to the second strip as well without any additional wiring. ⓘ Note that: · If you don't plan to cut the strip - just make sure you plan the length out correctly before you begin sticking it, otherwise you have to remove it and the adhesive won't be as strong. · If you solder the strip, make sure to solder following the direction of arrow – so it will work perfectly. · This product DOES NOT include the power supply and controller - required to light up the light strip. Read the product details carefully and see the product images - there you will also find the list of compatible controllers. · Be sure to get enough power to the lights or you will notice discolouration/brightness decrease towards the end if the voltage starts dropping. The strip only supports DC12V (don’t use DC5V – it is not enough, nor DC24V – it will fry the light strip). · Good adhesion requires a clean surface. Make sure to clean the surface well, and most likely with an alcohol wipe so that the adhesive tape sticks nicely to the surface. ✔ Pros: + Highly customisable + Tons of vibrant and bright colours + Individually Addressable LEDs + Great adhesion ✖ Cons: - No complaints! ( I will update this post if any quality issues arise ) I have had it for 1 month and it shows no signs of defects or poor quality. It is also a nice upgrade if you're a gamer and just want to mod your setup, or make it match the RGB on your PC. Definitely recommended!

Good quality lights

Good value LED strip. There are 300 LED's grouped into threes with 100 WS2811 controlling each group of three. The strip works great driven by an Arduino nano using the FastLED library. One slight issue is the strip is configured as Blue/Red/Green which caused a bit of head scratching. The normal order for the library is Red/Green/Blue, so the colours were initially wrong. The LED strip lights up nice and bright. You will need a separate 6amp 12v power supply to fully drive all the LEDs, it won't light using the 5v from the Arduino. Plug in connectors are fitted at both ends to allow easy chaining of multiple strips, but I would recommend a separate 12v supply fed directly to each strip, extra wires from the strips are there for this purpose.

These LED Strips work great with the SP110E controller i also bought from BTF-Lighting, lots of different lighting options to choose from and the Led strips themselves are nice and bright which can also be customized in the app. 10/10!

Works well

Unfortunately the colours on mine when used with wled are a bit mixed up , but still useable .

Really good addressable LED strip bought this along with the X2 programmer BTF-LIGHTING Digital Addressable Led Strip Music Controller X2(X1 updated version) For WS2811 WS2812B SK6812RGB 6803 WS2813 Led strip...

3 of the led's were not working properly/faulty. It was also getting super hot!