JDiction Epoxy Resin Clear High Gloss Epoxy Resin, Maximum 1.5 Inch Deep Pour 1 Gallon Casting Resin for Jewelry Making, Table Top, Wood and Mold Crafts

First time to ever use epoxy and this one was very easy to use. It produced few bubbles but I applied to much heat to pop them and the edges started to harden before the other bubbles could make it to the surface this was my mistake and not the product fault. Mixed with pigment great and I poured 1.5" thick board and it was cured in 20 hours and ready to remove from the mold. I will be buying more of this product.Update:If you are using wood, coat the edge with epoxy and let it dry before pouring epoxy in the mold and that will help with the bubbles. Just did that and no bubbles at all as the epoxy does not soak into the wood releasing air.

I purchased the 1-gallon A/B deep pour resin set to create a resin table as a birthday gift for my sister-in-law, and it worked perfectly! The resin had a smooth consistency, self-leveling properties, and a long working time that allowed me to embed dried flowers and create thick, flawless layers.The cured resin is crystal clear, durable, and has a beautiful glossy finish that really enhances the natural flowers and design underneath. This resin made my project easier and turned out professional quality. Highly recommend for anyone making deep resin pours or large resin art pieces!

The best resin I have worked with for resin art tumblers. Long work time and no bubbles. Both parts are nice and thin, so easy to mix without bubbles. It does take a while to fully cure after the long work time but still so worth it.

I have purchased this epoxy resin after buying other brands, and I keep coming back to JDiction. It works so well in my molds, both jewelry and larger molds alike, that I am in awe every time I unmold a piece - never sticky, holds pigments very well, and always a rock hard result.Thank you for making such an excellent product!

I purchased this on a daily deal for a great price. I have used several different epoxy resin kits in the past and this one stayed workable for the shortest period of time. I tried to fill avoid with some of the mixture about 20 minutes into the pour and it was so thick by that time thaat I am left with a bumpy area that I will need to sand and rework.PROs: Price, Low Odor, Practically Bubble FreeCons: Short workabilityConclusion: This would be a good product for smaller items that don't need much working time. I was impressed by the overall lack of bubbles. Even when I "otorched" the surface, I didn't get hardly any bubbles. I haven't reworked this tabletop yet, so I don't know how the end result will look.

I recently tried the JDiction Epoxy Resin Clear High Gloss Epoxy Resin for a DIY project, and I couldn't be happier with the results! This resin is incredibly easy to use, making it perfect for both beginners and experienced crafters alike.One of the standout features is its very low odor, which was a pleasant surprise. Unlike other resins I've used in the past, this one didn't overwhelm me with fumes while working. It sets up quickly, allowing me to complete my projects in a timely manner without long wait times.The high gloss finish is stunning and gives my projects a professional look. I’ve used it on a variety of surfaces, and the clarity is impressive. It also cures hard and durable, ensuring that my creations will last.Overall, I highly recommend JDiction Epoxy Resin for anyone looking to elevate their crafting or DIY projects. Its ease of use, minimal odor, and quick setting time make it a fantastic choice. I will definitely be purchasing more for future projects!

I make resin art and jewelry for a living. First off, the performance that every resin advertises is based on factory controlled working environments. I have the ambient temperature set to 75F and a dehumidifier set to 50% or less, which seems to be the general recommendation. Every resin fail I’ve had has been because of high humidity or cold temps.This resin is my favorite so far.PROS- super clear, like glass clear when cured, unless the silicone mold is poor quality or humidity is too high. Also doesn’t seem to attract dust like other resins but I vacuum my studio regularly and have an air purifier.- virtually no bubbles when cured - I use a small electric mixer and pour in layers of 0.5.” Always when working with resin, temp has to be high enough to encourage gas to escape but low enough that cure time isn’t accelerated and gas gets trapped before reaching the surface. It’s science, people. I even accidentally introduced a ton of bubbles when not paying attention to the submersion of my mixer and they disappeared once poured and hit with a heat gun. Also haven’t had a single issue with micro-bubbles, the low viscosity isolates gas and they dissolve quickly- the resin comes out slightly blue tinted, unnoticeable except to the trained eye, and this prevents yellowing. I think it makes for a really attractive finish. Other resins look dull in comparison.- easy to maintain surface tension which is helpful for when I accidentally overfill molds - just remove a bit with a syringe and it easily self-levels- no odor when using and no off-gassing odor when cured. Other resins I’ve had to submerge cured products in baking soda before I can sell them because the products reek- handles dyes and inclusions really well - no streaking, flowers stay submerged and don’t rot, bubbles don’t adhere to them.- finished products are oleophobic (resist fingerprints), hydrophobic, easy to carve and polish, don’t scratch easily and don’t break when droppedCONS- The minor (in my opinion) trade off is the short work time (20-30 min) and long cure time. I mix in low quantities (4-7oz) and pour in thin layers, recoat after 20ish hours. I leave fully finished pieces in the mold for 48hrs to be safe, but I have a large workspace and can work on multiple pieces at a time.- Also, the locking caps are annoying to clean. I don’t use the pumps. Lotion bottles, soap bottles, etc use pumps and the reverse gravity suction action introduces air. Don’t do it. Just use accurate measuring cups and a steady hand.I highly recommend this resin for pros and even beginners if you pay attention to the required working conditions. It’s beautiful to work with and low stress compared to others. And my art sales are up!

I wasn't sure at first if I like this resin and tried a few around same time but realized I kept grabbing this brand more. It does not bubble half as bad as every other brand when mixing and degasses rather quickly as well. Its a good overall resin and my go to without being expensive