Blade Inductrix FPV Plus Rtf (BLH9600) Quadcopters

I bought this little guy to fly around my house when the weather outside prohibited me from flying my other quads. I already had a few other "toy" quads to fly around the house, but wanted something more sturdy, more agile, faster and with an FPV camera. And something that had props guards so I wouldn't hurt anyone or destroy anything in my house. This little guy fits the bill (almost) perfectly. I say almost because the stock frame breaks too easily, and the stock props can't seem to stay on the motors. Sad, but true. HOWEVER, once you upgrade your frame (I recommend the CrazyPony 820 75mm whoop frame or the BetaFlight 75mm frame) and upgrade the props (I recommend the Rakonheli 40mm 4 blade) - this thing absolutely kicks butt and is a TON of fun! It is EXACTLY what I wanted to fly around the house. I bought two of these and broke the stock frames the first day. I also spent a great deal of time searching for stray props. Not any more. Since I've swapped out the frames and props, I haven't broken one frame nor have I lost one prop - and I crash a lot! Both are now virtually indestructible, in my experience. Know this, though: 3 blade props won't allow you to "meow" - for whatever reason - they fly fine, but stick to the 4 blades so you can meow (it's a great function). Overall I am extremely happy with this quad (all quads have SOME weak points). Oh, and I also had to replace the VTX antenna. Over time, it get's abused. Grabbed a receiver wire off one of my toy drones, soldered it on and now...it works great again! Seriously, I love this quad! It would be 5 stars if not for the stock frame and props. But I love to fly, and this thing flies like a dream! I don't fly Acro (blue, stability mode is for me) but I've heard Acro is not good. Sorry, can't speak to that. But again, for how I fly and for what I needed, this thing is the bomb! I don't use the stock TX anymore (got a QX7), but I really liked it - simple and easy to use/bind, and if you press down on the right stick it gives you dual rates, which makes it less responsive and easier for a beginner to fly. Or, for an experienced pilot to fly around slow and smooth. Finally, the altitude hold mode is iffy at best and doesn't work with the upgraded frames - at least, not well. With everything stock the best way to use this mode is to use the blue mode to get to the altitude you want, and then switch to green and start flying. It's okay, but I really don't need it. I fly in stability mode 100% of the time. Sorry to be so long-winded, but I had a lot I wanted to say about this quad. Mostly, that I absolutely LOVE to fly it!

I have been out of the hobby for such a long time. The helicam v-cam was my last quad and since then they’ve had such a change in how quads are designed with these whoop style quads. I decided to give this quad a try as my first since my hiatus from the hobby after watching the RC Saylors review of it on YouTube. I’m so glad I did. This quad is really fun for FPV flights which is something I haven’t attempted since the Hubsan 107D which has a narrower field of view, extremely short flight times of around 2 minutes and a flimsy prop guard. The Inductrix FPV Plus basically surpasses that hubsan model in every field. I typically get flight times of 6-7 minutes with the stock battery even if I push the motors by zipping around. I’ve heard the props fly off after every crash but strangely enough I haven’t had this problem. In fact removing the props is a little difficult without tweezers. Perhaps they have started to fix that issue but so far I’ve crashed mine a few times not and pretty hard crashes too. The blades, frame and camera are all fine as if nothing happened. The hardest crash I had only popped the motors out a bit but after removing the props I pushed the motors back in no problem. I’ve had a couple FPV flights outside when there’s isn’t a strong wind and it’s my new favorite thing to do. The included dvr FPV screen is pretty awesome but after getting better at flying it I purchased the AOMWAY Commander goggles and use them instead of the little screen and I love it even more. The only issue I had was the first order I received if the inductrix had a screen that only lasted a day and burnt out for no apparent reason. I tried charging it again thinking the battery died but after fully charging in 3-5 hours it still wouldn’t turn on. The quad that came at first also had a horrible drift that couldn’t be fixed with trim. Thankfully amazon replaced it for me and the second order I received has a quad without the strange hard drift forward and a dvr that hasn’t burnt out and have already had to recharge a couple times. Thanks to this quad I’ve finally learned to fly FPV which is something I couldn’t do with the hubsan 107D.

This is a great Starter Drone, and still a blast for the more experienced flyers as well. Very stable for its size. I have been able to fly outside in 8-9 mph winds with no major proplems. Range is also pretty good for a drone this size 300+ feet in a wide open area before signal to Fpv starts to go out. Only thing I have noticed that someone may complain about is the Altitude hold occasionally has a mind of its own sometimes it will just climb an extra 20 feet or so on its own. I could be picking up interference or something from time to time causing this to happen? More of a mystery than a problem. Me and my 9 year old Son have Been Flying it for the past month without any real complaints. I'mThinking about getting another one!

I now own about five 'inside' drones, but I wish it were four - I don't believe this one is remotely worth the money.The Pros:It is cute and seems durable (got right up after a few crashes).The camera is good; the included Spektrum camera viewer and DVR is excellent, and the latency is very low.The Cons:The controller is very 'twichy, where the stick will go from no effect to violent in only a few degrees of travel, making it very hard to control.The 'altitude hold' mode is worse that useless; it is more unstable than mode 2.The 'meow' mode actuates, but it never seems to turn the craft over - cute but relatively useless.Conclusions:If you just want a cute and fun inducted fan drone to fly and don't need an FPV mode, get the F36 Furbee for about $15.If you want FPV, add your own camera to the F36, or buy the eaChine E013 for about $70 - and it has a better controller too.My bottom line - this was a waste of about $180, although I did get a good Spektrum viewer...

Mehrmals haben sich die Propeller im Flug gelöst. Funktionen entsprechen nicht denen der Anleitung. Zum Starten muss der linke Steuerknüppel kurz gedrückt werden. Dann laufen die Motoren mit geringer Drehzahl und Mann kann Starten. Wenn Mann etwas härter landet drehen die Motoren weiter und die Propst fliegen einem um die Ohren. Durch nochmaliges Drücken bleiben sie stehen. Normal ist linker Steuerknüppel zum Binden da. Im grünen Modus fliegt der Industrie sehr instabil. Habe das Teil nach Österreich zurückgesendet. 17 Euro Rücksendeporto für ein fehlerhaftes Teil sind futsch. Nicht nochmal.