Cali Raised LEDLow Profile LED Ditch Light Mounting Brackets for 2010-2023 4Runner

Great value, sturdy and great light positioning! Highly recommended! Couple things to note before installation:1.) Attach your lights to the brackets before securing the brackets to your hood. The brackets come with 2 bolts & lock nuts but the bolt heads were too small to "lock" into my 2019 CO LIGHTS bracket during install. No problem at all. The lights came with their own hardware that fit perfectly onto the brackets.2.) Install the brackets one bolt at a time. Start with the hood bolt closest to the front of the car. Remove the ONE bolt, align the end bracket hole, bolt bracket to hood. Tighten the bolt just enough to keep the hood in place once you remove the 2nd hood bolt. Remove the 2nd hood bolt (closest to the windshield), rotate the bracket so the 2nd holes line up, bolt it tight, re-tighten the 1st bolt.

I you buy thicker bodied ditch lights like the budget friendly NILIGHT, for example, just know that when your hood is up, the light will slightly rest on the passenger side windshield wiper. The angle of the bracket does NOT come FWD enough to stay away from the windshield wiper when hood is up. At least not on the lights I bought as "people often buy together" suggestion. A THINNER light, like the expensive BAJA lights should be fine based on what I see. Needs maybe another 1/2 inch of clearance. Disappointed, but will have to do for now, going on a trip. Also, these brackets need slots cut into them for zip ties to keep the light cables tight, and out of the way. Attention to detail is off here.

I was hesitant to order these. 50 something seemed a little high for what they are. My friend bought some for his Tacoma that were a third of the price. His are flimsy and these are way thicker and sturdy. Glad I went the route I did. Mine were shipped from Cali raised. The powder coating seems to be holding up very well.

Easy to install and keeps the ditch lights perfectly out of the way. The passenger side in particular must be carefully done so that the light you mount to these does not break your windshield wipers. These brackets have elongated holes that allow you to move them forwards or backward up to maybe 3/4" - 1". Glad I bought these.

Extremely beefy and perfect fit! Install was super easy; just remove one bolt at a time and replace with the bracket so you don't mess up the hood alignment. 2-3 minutes per side. Use a 12mm socket and put a rag on the fender to avoid accidental dings.Bracket lines up perfectly for a low-profile placement. Lights don't get n my line of sight when driving.

Worked great for my project. I ended up heavily altering product to fit a vhf/uhf NMO antenna mount, but it works perfectly after drilling out hole larger, thinning out end of mounting bracket for regular depth nmo mount, repainting, and adding extra grounding from mount to body and frame.

These are cool low profile units, that I installed baja lights on. Take your time on the install, make sure your hood doesn't shift and you'll be good. 6 months in and no complaints.

Excellent product! Very low profile and sturdy. Mounting bracket is very well powder coated. Used the mount to install Baja Designs XL80’s. These are not very small and the brackets support them with ease. I would very much recommend this product.RickSan Diego, California

No issues with install been on for a few months no issues.Feel sturdy, well made.Overall great purchase fit my 2020 ORP perfect.Was this review helpful ?

Install was easy. A good thick bracket.