07-19 Silverado Rear Bump Stops, Jounce Bumpers Compatible with Chevy 2007-2019 Silverado 1500, 07-19 Sierra 1500 (Pack of 2)

Fit perfectly, easy installation on my 2011 Silverado. Used the OEM bolts did not care for supplied ones not saying they would not work just knew the OEM would for work.

Exactly what I was looking for and fit great. Didn't use hardware that came with them. I did spray mine with black plastidip because the color wasn't to my liking.

My old bump stops had fallen off and the bolts were rusted in place. After removing the bolts I decide to get some grade 8 bolts to replace them. I'm not sure if the ones that came with the bump stops would fit, but I tend not to trust the hardware that comes with automotive stuff from China. Installed on 2007 NBS Silverado.

Worked perfect on my 2008 Silverado 1500. Came with new boots but just use the factory bolt with the new bump stops because the frame has a nut welded inside of the bracket.

Very durable and easy to install

Installed on my new body style 2007 silverado ext. cab. Exact shape and fitment as the old factory bumpers however the new nuts and bolts provided were too large. I cleaned and reused the factory 10mm bolts that were holding up the old bumpers.No nuts were needed for my application anyway since the bracket that the old foam bumpers were seated to already had fixed nuts welded onto them.

Install was on a 2019 Chevy Silverado 1500. The bump stops came with bolts that take a 17mm socket. Here's the problem, the hole on the bump stop is not large enough to accept a 17mm socket. To resolve the issue I used 2 bolts I had on hand (3/8", 16 thread) that only required a 9/16" socket which fit just fine inside the bump stop.

Bump Stops Worked but Better Install Info Would Help. These stops are similar to the OEM. They came with 2 -16mm bolts and shoulder nuts which cannot be used with the stops as they will not fit up through the hole in the stop nor will a 16mm ratchet and socket fit. My application, a 2014 Silverado 1500 LT Crew Cab, had 10mm bolts that threaded up into the frame bracket that has fixed nuts. Once I cut the OEM stop off at the bracket cup exposing the 10mm bolt, the install was quick. Reusing the original 10mm bolts the socket and ratchet extension fit up through the stop.. It appears that there are multiple mount variations on these Chevy 2007 to 2019 trucks and I hope this review info helps the next purchaser.