Seco-Lam E-922CPQ Enforcer Automatic Voice Dialer, 6 Phone Numbers & 3 Trigger Inputs

Description

Know immediately when your security system is triggered by an alarm with the Seco-Larm Enforcer Automatic Voice Dialer. This voice dialer can call up to 6 emergency numbers and deliver a recorded message (up to 18 seconds long) and repeat the message twice. Each number can be called 3 times and the receiver is allowed to stop the dialing process or trigger an auxiliary relay output that's connected to an external device (door lock, siren, strobe light, etc.) It even features an LCD display that indicates the status (ready or alarm), showing which input and number were dialed.Automatically dials up to 6 phone numbers when triggeredRemotely listen in and trigger or turn off the auxiliary relayThe last 6 seconds of the alarm message can be customizable for each inputFlash memory is built-in and helps protect against data loss due to power failureWires into any standard alarm/security systemContentsVoice Dialer Unit(2) Wall Mount Screws(2) Plastic Wall AnchorsManualNotesFor single-line analog or VOIP telephone systems. The E-922CPQ may work with some digital phone systems (single-line or PBX), depending on the system.If the "Inhibit" input is not used, it should be programmed as low N.C.Technical DetailsManufacturer Part #: E-922CPQUPC: 676544021490Operating Voltage: 10~18 VDCCurrent Draw (max.):Standby: 50mA@12VDCDialing: 200mA@12VDCPhone System: For single-line analog or VOIP phone systemsAlarm Message Length (user recorded): 12s site message + 6s individual message for each inputProgrammable Alarm Phone Numbers: 6Maximum Digits Per Phone Number: 14Programmable Dial Attempts: Up to 3 times per numberAlarm Message Repeat: 1~2 times for each numberTrigger Inputs:1-3: Programmable high (input >3.5V, max. 15V) N.O. or N.C. or low (input 3.5V, max. 15V) N.O. or N.C. or low (input <1V) N.O. or N.C.Auxiliary Output: 2A@24VDC, NO/NC, programmable 1~255sOther Features:Works as a stand-alone unit or connected to a security systemListen in, stop the dialing process, and/or turn the auxiliary output on or off during dialer call outCall in at any time to listen in to the room and/or turn the auxiliary output on or offTone or pulse dialingTerminal blocks for all external connectionsWall-mountableOperating Temperature: 32°~140°F (0°~60°C)Weight: 15.9-oz (450g)Dimensions: 4-1/16 x 5-9/16 x 1-11/16 inches (104 x 142 x 43 mm)Credentials: FCC, CE RoHS Review: Returned - Couldn’t get it to work with my system.. looked good. Review: Not simple to use and no power supply included. - I was looking for a simple security phone dialer, this is a advanced dialer. IT NEED A POWER SUPPLY THAT IS NOT INCLUDED. It is like a Smart Phone, to Smart for me, I had to get help. A lot of features.