2Pack 09985 for presto Pressure Canner Sealing Ring Gasket 01745 01751 01755 01781 01782 01784 presto Pressure Cooker 16 18 23 Quart Including 2 Overpressure Plug 23 quart Pressure Canner Parts

Good fit, quick delivery.

I was pretty disappointed when these new gaskets didn't fully fill out the groove of the lid in one area. I never thought they'd seal but I tested them to 16 psi and, to my surprise, they seem to work perfectly. I soaked them for a while in hot water but they didn't loosen and fill the gap. Glad I still did a couple test runs afterwards. Great value if they hold up. $7.50 vs $22. The lid is indeed pretty hard to open though. Not super hard but still annoying. Also, don't leave these gaskets inside the lid when you put your pressure cooker in storage or don't lock the lid. That's why I had to replace mine. After leaving it for a few years, the metal tab on my PC caused a big dent on my gasket which caused leakage.

Bought because the safety plug on my Presto 16q started leaking. Popped out the old one, plugged in the new one, and boom, pumpkins canned.

It's a little hard to see from the image (the image shows the original seal atop the new seal) but the new seal from this vender is an almost perfect match to the original. If you look at the vender supplied images you can see that 1 of them shows some measurements. These measurements are not accurate and really don't even make sense. It should be obvious that the gasket material is not more than 3cm (1 1/2") wide. With this concern I decided to contact the vender. While they didn't supply the correct measurements, they did respond quickly and politely with a reassurance that if the fit was not right, they would immediately refund me. After receiving the new gaskets I realized that the new were almost indistinguishable from the original. the ring and the overpressure plug fits perfectly. Also, I got 2 rings and 2 plugs for cheaper then 1 set if I had bought an original Presto replacement. I'm very happy with this product.

This seal fit our pressure cooler, came with two and also two new rubber safety valves. Haven't cooked with it yet, should work.

The old cooker feels like a champ again no more leak and puddles to clean up

My old presto pressure canner has seen heavy use over the years but I started to notice water coming out of the the sides when I was using it and I just dealt with it for years. Finally when I thought it was just time to replace the entire thing I looked into seeing if I could just replace the gaskets and found this kit. I had the entire thing swapped in about 60 seconds and it worked just like new again. I only needed one so I left the second set in the bag and tucked it away even though I probably won't need it for another decade or two.

The gasket is clearly too small compared to the OEM version. Does not seal correctly for the supported canner model. Will not achieve pressure.

Excelente producto

At first I didn’t think this was the right size. I got the cover to lock and then could hardly get the lid to turn to unlock. After a few uses and lots of muscle power the ring works perfectly.

This is a must-have; they're reliable and still performing

J'ai reçu exactement ce dont j'avais besoin pour le remplacement de mon ancien.

Ripped off. Pictures and wording make you think you’re getting 2 sets. YOU ARE NOT. I just paid $48.02 Australian and received 1 set. Not happy