Fluidmaster Tank To Bowl Bolt & Gasket Kit 6102

Fit my toilet perfect and good price and easy to install

I needed to replace all of that stuff on my toilet, this set worked really well, no leaks. I youtubed how to do the things, but the packaging came with pretty decent instructions, too. If any other toilets I come across have this issue, I'll use this same one again.

This kit does exactly what it's supposed to. The gasket fits securely, and the brass bolts feel durable and reliable. It’s a universal solution, making it easy to install on most toilets without fuss. It’s a solid and affordable fix for tank-to-bowl connections at this price point.

This worked well to give me the extra bolts I need because this company only puts 2 bolts in their complete kit. If you have a 3 bolt tank you will need these. Don’t use the old ones unless they are exactly like these. I had a different style with a black rubber grommet head and reusing it caused it to leak and I had to take it all apart. Pay $10 and get the right bolts and do it right the first time.

This kit has everything you need if your bolts have rusted out. However, take it from experience when removing the old bolts do not even tap on them with a hammer or a screwdriver. Just a very slight tap, put a hairline crack in the tank. I sealed it, however when I was putting in the new bolts, they completely fell apart along the crack other than that it would be a real cheap fix to a common problem. Nevertheless, I had to buy a whole new toilet lesson learned. PS the reason why I went with this replacement kit was because my tank was leaking along where the bolts were because they had rusted and the headset fell off of the bolts but yet the bolts were still stuck slightly inside the tank. I’ll know better next time in 20 years.

I had a leak at the inlet water line to my toilet tank. The whole flush assembly was loose and the plastic lock washer broke off causing water to drip out of tank and run down my floor. I replaced the whole unit and bought a new flapper as well. A pair of channel locks and pliers along with a few towels and job was complete in an hour( I’m no plumber)! The directions were in English and easy to follow. Toilet has been smooth and running as it should.

Bolts are stainless, not brass. Large seal doesn't work on Jacuzzi toilet. Bolts and gaskets did work. No leaks so far, but I did have to get a different seal for the drain.

Had a leak in back of toilet every time it was flushed. I knew it had to be the tank to bowl gasket or the bolts as they were the original that came with toilet. Fairly easy and straightforward job, took about 40 minutes or so. The new parts all fit my toilet perfectly and no more leaks. Old gasket was completely worn and old bolts were pretty rusty. Don’t get ripped of by a plumber, they will lie to you and say u need a new toilet when all you need is this cheap kit and a little effort, do the work yourself it’s not that difficult.

very easy to install and good price, saved a lot of money ie did not need a plumber

We had a drip and upon inspection realized the tank could be rocked and then saw that the tank bolts in our 22-year-old toilet were disintegrated! Took the tank off, cleaned it outside with the hose and an old scrub brush, seated the new gasket-may as well change it all out while we're there, right?-put the new bolts in place, put it all back together and were so proud and then the drip was still there! Emptyed the water back out with a flush, gave everything a further tightening and this time-success! $15 worth of parts and the problem is solved. Not rocket science, easy job to do, took less than 10 minutes if you don't count carrying the tank outside to the backyard to clean up. I don't reccomend doing that but I do always recommend repairing over replacing!

Good

To maintain and refresh most standard toilets. The included hardware is similar quality to the factory. Recommended

Worked great replacing an old piece. All the hardware was there to do the job