LIAN LILancool III RGB Full Tower PC Case – Black – 4x 140mm Fans Pre-Installed – Tempered Glass – E-ATX Support – High Airflow

Putting a fairly basic (size-wise) system into this case. I was actually kicking myself initially as I had intended to purchase a full tower but somehow managed to order the midi, although once it arrived i noticed it is VERY large for a midi tower and everything will fit into this (even if you're a 4090 guy, only 4070 myself).To access the innards you just hand-turn an attached bolt on the rear top-mesh and remove, and then you have 2 very nice tempered-glass side-windows you swing out from their magnetic clasps. The top and bottom inner-case mesh bits are holed for just about any fans or radiators you need to fix.Really heavy, strong, good build quality with plenty of space for existing hardware and wiring, comes with 4 big fans also so good for the £150 price that I paid - would recommend!

Really nice case. Great performance, very configurable and highly mechanical. 140mm fans all over, except for bottom slots. Easy to install.I also managed to fit in a 420mm radiator in the front, which was not necessarily "supported" on the Lian Li documentation. It required removing a few pieces inside, but this was all manageable, with only pain being, removing one case foot to access a screw. Generally good experience all round.Only issues - it's a bit heavy, and perhaps not the "quietest" or best at isolating the sound of internal components - but generally has best sound-heat disapation compared to other cases (see gamers nexus review).One other "issue" is with the area behind motherboard - it is challenging to fit in ATX cables, especially if you have anything like Lian Li strimers for mobo/ gfx. Can be challenging to get everything to fit and close properly.

This case is very sleek. It's very clean. It is amazing for a full blackout build.The build quality is very good. Everything seems to fit just fine. The amount of space is amazing.Accessories like camouflage. We're very good and not a single thing was damaged after the item was delivered.How would recommend the seller as I bought several cases from them.

I used this case to build my first PC and this case made it easy, loads of space to work with and cable management was easy.

The Liancool 3 case is nicely designed and well thought out as a place for all the components of your computer. I just have a few comments. The specifications of this box include information that the top of the box can accommodate a 420mm AIO cooler. Well, you can't. The maximum radiator is 360mm. You can fit a 420mm radiator on the front of the case. And with minor problems. Because you must first remove the 2.5-inch disk tray at the bottom. Another issue is the problem of closing the internal doors from the side of the working panel. I don't know how to route all the cables to close it. The motherboard power cable is very thick and makes it very difficult to close this door. The Velcro fasteners used to fasten the cables in the housing just to the left of the working panel tend to fall off. They are not properly attached by the manufacturer. After installation, the front panel fell off several times when I opened it, even though nothing was damaged. I do not know why. I have an Arctic Freezer 420mm AIO cooler and it has quite a thick cooler. I also have high profile Corsair Dominator RAM on my motherboard. It was impossible to install this cooler when you have high profile RAM. Plus what I mentioned earlier, that the 420mm size does not fit the top of the case. On the one hand, everything fit and generally bravo for easy installation access to components from each side of the box, but on the other hand, there are still a few elements that need improvement. Brava for the socket to connect the front panel. This is how it should look like in all PC cases. Bravo for the well-placed cable windows inside. Overall rating: very good. I recommend this box.

This is my first case from Liam Li, I have to say this was a dream to build in plenty of space which made cable managent very easy, 10/10

Excelent!

Needed a new pc case this fitted the build reasonable price so am happy with it

This was my first PC build, so I don't have a lot to compare to. That being said, all my friends warned me about the struggles of working inside the confined space of a PC case. This case was EXTREMELEY easy to work with. Everything is removable and adustable. All of the panels and doors easily open/detach. Tons of space for an easy PSU installation, with so much extra space for cables if you removed the HDD racks in the bottom. Super easy cable management straps and channels all hidden behind removable doors. Adjustable cable entry points for switching between standard ATX and the larger format. Removable mount at the top for installing your radiator/fans outside of the case, and then just dropping it in. This also allows for easy access to hard to reach areas of the motherboard in case you accidentally forget to plug a couple things into the top of the motherboard like I did. A bit pricier than some other options, but it looks, feels, and performs like a luxury option. The time it will save you during assembly is worth the extra cash!

Ordered this case for my first pc build. Work like a charm and the airflow is perfect

RECOMENDO, muitos pontos positivos e a facilidade de passar os cabos

Case perfetto per build di fascia alta.Entra perfettamente 4090 suprim della MSI il che è tutto dire.Consigliato. Miglior case in assoluto anche per ventilazione e gestione degli sportelli posteriori laterali e anteriori.

The left side of the case is bent please return 5 € for the bent part