SAPRETAILERBBQ Charcoal Chimney Starter

Value for price

It Works as it's supposed to. Size is good for home bbq. You can either use the Firestarter cubes or can put it on top of a gas stove. I usually go for 1-2 Firestarter cubes on top of some paper with some wooden sticks and put it on top. I mix the coconut shell briquettes & wood charcoal (about 70:30 ratio). And it would take around 10 mins to get a burn like shown in the video. Handle is not too hot to hold but u can feel the heat coming off of the thing itself at that point. Better to use a cloth or baking gloves even.Only thing negative about it is Heat resistance. I suppose thats beacuse the Metal isn't thick enough. The discoloration around the middle where is gets too Hot. But honestly it doesn't bother me too much.It Works.plain & Simple. Definitely would recommend buying. 👌

It is nice and easy to burn the charcoal quickly but only minus point is there is no protection for holder, hand will get burn but I use gloves to avoid this, Without gloves do not lift it with hot charcoal, use gloves before it. Otherwise this is fantastic product.

Very good

The product, a galvanized plain thin sheet, is just ok, but it needs manufacturers attention for safety. The seller advises to put charcoal into it and put directly on gas stove to fire the charcoal. It works well , but there are about 7 holes in the bottom, each dia of the holes is about 1.5 inches or 40 mm . After firing the charcoal, when carry to barbeque area, small pieces of fired charcoal falls down through the holes which is only due to bigger holes. I got minor injury on my toe when tried the product first time. Anyhow, during my second attempt, i bought a 7 inches wide frying spoon ( the same big spoon used for frying items in oil which had multple small holes ) after removing its handle, I tightly tied it to the bootom of this product. After doing this i found the product safe to carry with fire. My suggestion is a 15 mm wide multiple holes in the boottom of this product is more than enough, why 40 mm wide 7 holes through which small fires start to fall. I am even planning to remove the entire bottom and replace it with metal sheet with multiple 10 to 15 mm holes. Be safe guys