B690A Camera Tripod for Travel,Lightweight Aluminum Portable DSLR Tripod with 360 Degree Ball Head and Carry Bag, Camera Stand for Ring Light & Canon Nikon Sony DSLR

For background, I do videography and still photography with a Lumix GH5, Canon T3i, DJI Phantom 4 Pro and DJI Osmo+. I own a set of Slik Pro 700DX tripod legs which are huge, but create an incredibly stable platform for just about anything. I also have a Zomei Z888C Carbon Fiber tripod which I consider my "standard" tripod. It's light and compact enough to bring along most places, but very stable and a max height of 68". I bring it when I'm doing a planned shoot. However, it's still big enough that I tend to leave it behind in many situations when I'm traveling light. So for me, this Bonfoto B690A fills the role of a travel tripod, and a "just in case" tripod. If I'm grabbing a small set of gear to throw in a gear pack for a casual shoot or impromptu event, and I don't really think I'll need a tripod, this is small enough that I can bring it along "just in case". Considerably smaller and lighter than my other tripods, but is still substantial enough, and stable enough, to be useful in many situations. It also takes up a lot less room in a suitcase for traveling or backpacking. I'm actually quite surprised at how stable it is for such a small and inexpensive piece of gear. Even when both the legs and center column are fully extended, it's very usable. Of course it isn't as stable as the others I own, but plenty enough to do the job especially given that if I didn't have this tripod, I wouldn't bring one along at all for some situations. I like the flip-lock legs, although the locks are plastic and I'm concerned that they may not hold up long term. There are a few other small places where plastic is used instead of metal, such as in the quick release plate, but that's all good because it helps reduce the weight, which is one of the reasons I got this. I weighed it at 2 pounds 7 ounces, a real lightweight to me! Everything works smoothly and has the feel of a quality tripod. In fact, many of its features look identical to the Zomei tripod I own, and I'd guess that they're both manufactured by the same company. The red accents make for an attractive, modern look. The ball head seems well made and works fine. You can loosen a small knob on the side which releases the head to rotate in the pan axis, without unlocking the ball. This makes it more useful for videography and still panoramas. The rotation of the pan axis has a very smooth feel to it, but also has a resistance to motion that gives it a kind of viscous feel. It rotates with low to moderate force when moved slowly, but requires more force to rotate more quickly. This imparts a steadiness to video panning, and pretty much eliminates the uneven pan speed you usually get from hand panning on cheap tripods. By the way, this feature is also on my Zomei tripod ball head, which looks very similar to this one. Bottom line, this tripod will get a lot of use from me. It's the perfect size and weight to allow me to bring it on shoots where I might otherwise decide to just leave the tripod at home. And at $65, it's cheap enough that I don't have to worry much about mishandling it or having it get damaged in transit. Definitely an excellent travel tripod. I highly recommend it!

This is a terrific tripod, very easy to set up, lightweight, sturdy and stable. The fit and finish make the tripod look like it costs a lot more than it did. This tripod is a tremendous value. The inclusion of the carrying case is another excellent feature as well as the easy to use ball head with protective cover. The size of the tripod when folded is about 14 inches and when placed in its case is easy to carry over the shoulder. I have loved using it for the brief period that I have had it. Anyone looking for a quality, extremely affordable, well-made and compact tripod should definitely take a look at the Bonfoto 690A lightweight aluminum alloy tripod with a 360 degree ball head, 1/4 inch quick release plate, bubble level and carry bag. You will be very happy you did. I am using mine with a Canon SL2 lightweight, compact DSLR. I works perfectly when attached. A nice, unexpected feature is that when my camera is attached to the mounting plate, I still have access to my battery and sd card compartment located on the bottom of the camera. I am able to take both out and put them back without having to remove the plate. This is very useful and saves time. Bravo! Bonfoto.

This is a high quality tripod at a great price. It’s surprisingly lightweight and sturdy enough to easily hold my Nikon D3300 with standard lens. I’m sure it can easily support larger telephoto lenses too. The case is good quality with nice protective padding. This folds up surprisingly small. The thin red rings on the grips and red tabs on the adjustment tabs are a subtle attractive touch. I originally bought the Amazon Basics lightweight tripod not realizing it wasn’t rated to support DSLR cameras. It might have worked okay in my studio setup, but I decided to return it and spring for this one instead. I’m so glad I did. It’s like night and day. This is thoughtfully designed. Another reviewer mentioned preferring that the tilt head would have a long arm for adjusting like other tripods, but I like the knob and find it very easy to use. Great job, Bonfoto! I couldn’t be happier.

I never feel compelled to write reviews, but this little tripod deserves it. I just needed something lightweight, but durable enough to withstand travel and some hiking in to remote areas for time-lapse photography and the occasional video with a FujiFilm XT2 and various lenses. I was really surprised at the quality of the build and the attention to detail on things like the felt bag cover for the head and quality carrying tote. The tripod is well made with durable materials. The aluminum legs have a nice coat and finish and the Delrin (or whatever the plastic is) on the leg latches are solid. Even in the dark, I have had no problem handling the various parts. There is one foam pad on an upper leg which seems like durable/quality material that will last. I like that they only chose one leg for the pad, rather than the standard two pads on most tripods. Again, in the dark shooting astrophotography, it's nice to use the single pad as a directional reference. The pointed, rubber feet work well, although it would've been a nice touch to make them removable to reveal spikes underneath to mount on the ground in rough terrain/uneven surfaces. It is a great feature to be able to unscrew the ball head from the base so I can connect things like a small slider or equatorial tracking mount. It's thoughtful of the manufacturer that they included a worm screw for the ball head attachment that is a standard 3/8 thread (or could be 5/8, not sure) with one end stepping down to a standard 1/4-20 thread. I can reverse that screw and have the option of attaching most any accessory to the platform base while having the ball head available to use elsewhere. The ball head action is very smooth and locks in place nicely. All of the knobs and action of the swivel feature are very fluid and lock down well. The adjustment on the neck/center post is done by twisting the metal+rubberized collars to extend and contract the height, and these collars have a very nice, fluid action to them. This works well in conjunction with the red aluminum latches that click the legs in to place at various angles to obtain maximum/minimum height of the unit. It was another nice touch to add the spring hook to the end of the center post so that you can hang a sandbag or weight for added stability. I have a 5lbs. and 10lbs. bag. I was a little worried with the 10 that I was overdoing it, but it worked fine. The 5 has been the go to and it works for added stability. The red accents and branding are classic and add a nice polish to the system, especially if you need to have gear on the job that needs to present well to your client. My only complaint is the camera plate and female receiver portion. They decided to make that entire camera platform out of a hard Delrin/resin/plastic, instead of continuing the metal from the base housing, knobs, and ball head. It is much more solid/harder/durable than the latch plastic, but I don't think they should've skimped out here. It would have been a nicer touch to maintain the solid metal throughout the camera platform. Not sure why that decision was made. I would've gladly paid a bit more if it was a cost thing. It's not a deal breaker, by any means, but I'll just have to be aware of it when loading/unloading gear from a vehicle/location and when setting up/tearing down. I don't see this happening, but would hate for the plastic to crack or break by striking something hard or being crushed by a case, especially at the female receiver side. This is a drop-in/side loading plate, which is nice and should save from any shaving of the plastic had it been a slide-in type of mount. There is an Allen screw that sits flush inside the top of the female receiver side and attaches the platform to the ball head. I'm assuming you can remove this and replace the entire camera platform with one of your choosing, but I haven't tried this yet. Lastly on this complaint, there is a spherical spirit level at the top of the camera platform, right next to where the camera plate loads. It's basically useless as your camera will cover it as soon as it's loaded and a level above the ball head is useless as you will be adjusting the ball head for the frame anyway and if necessary using the camera level. I would've liked to have seen the level at the base below the ball head so I could level the legs from the ground. All in all, this is a great product for the price and one I'm sure I'll get plenty of years of use and enjoyment out of. With a few modifications, it will be a trusted companion on a lot of shoots. Purchase with confidence!

I brought this tripod as a replacement for a terrible unit that I had just returned (ESDDI Camera Tripod, 55'' Professional DSLR Aluminum Camera Tripod for Canon, Nikon, Sony, Samsung, Olympus, Panasonic & Pentax + eCost Microfiber). Although more expensive, the difference could not be greater. The former unit is essentially a cheap, breakable, plastic toy. This unit is mostly aluminum with a carefully thought out design, and built to a good standard. Not quite 'professional' but at the price a very good deal. Actually this unit, when compressed, is shorter, making attachment to a portable camera bag more efficient, especially for travel on airplane. One of the things that I like is that the ball head uses standard screw connections. Turns out I have a larger ball head in my collection of stuff, and it fit's nicely on this unit, giving me even more capability. Hopefully it will stand the test of time, as well.

The B690A may very well be the best travel/hiking tripod money can buy, and on sale for forty five bucks it was a steal. Verified the weight to be 2.61 lbs or 1.185 kg. 54.5 inch height fully extended as a tripod. For travel and hiking, the smaller and lighter the better. Smaller to a point, though. If its too short, well, its obviously not going to work for some situations. I feel that 52 inches is that minimum height for me, so this tripod checks the box. As long as its strong enough, the lighter the better. You can always hang your bag from it for extra stability. I feel this tripod is definitely sturdy enough as is, probably wont need to weight it down most of the time. Ball head is what you would expect from a minimum weight, small size tripod. It is adequate. Holds my Z6 with Sigma 150-600mm lens just fine. You can do better than rough pans for videos, but this is no a fluid video head obviously. Comparing to the Geekoto AT24 Traveller, which I have had for a year, these are on par. The Geekoto is slightly heavier at 2.8 lbs, but it also feels ever so slightly beefier especially when weighted down with a bag full of gear. Honestly, both are a fine choice, and you cant go wrong either way. Unless that 0.2 lbs means the world to you, these are the best two travel/hiking tripods on the market. Get whichever is cheapest at the time. I managed to get flash deals on each of these, so I am happy to own both. If you are serious about photography, do yourself a favor and stay away from anything smaller/lighter than these. They will be a lot easier to hump, but wont do the job well when you need it to. The Geekoto AT24 and Bonfoto B690A are worth bringing, even if it means I have to leave a lens or two behind.

I love how light weight and versatile this tripod is. How steady it holds my camera and feels sturdy when mounted. Holds my camera nice and snug. The finish on the gloss on the tripod is super appealing too. Like the way I can easily make it into a monopod and run. I got a 360 degree turn at a twist of a knob which is great so I don’t have to move the whole tripod around. Tested this out in the open at a park and for the price I’m pleased with how it turned out. Excellent product for the price.

The tripod seems to be good quality overall, but the ball head slips with my Canon 5D Mark II and the 20-70MM Lens on it. I tightened it is tight as possible and it still slips. The quick Camera plate also slips and the camera rotates. The quick connect should have a thin piece of rubber on it to prevent it from rotating so much. I bought the camera to take on vacation to Bahamas to take family pics on the beach. I liked the overall small size and weight for travel.

Excellent for the price range, folds really small and easy transport with a good case. I considered a $400 tripod but so glad I purchased this one, will look forward to carrying dragging and knocking it about on shoots, but I reckon it will be great

Just an awesome tripod for Nightline cityscape photography. It is light and sturdy. Wouldn't take it for outdoor excursions but it isn't designed for those anyways. I do wish it can go a bit higher thought.

Cheap tripod, very good quality for its price Super fast delivery loved it

I’ve been looking for a tripod I can take with me on hikes and while travelling. This is lightweight enough and fits perfectly in my daypack!

Light weight and collapses into a very small package that is easily carried the side of a backpack. Seems to be quite well made. All of the clamps, etc. operate well.