AbramsTaurus Premium 12V Switch Box Panel - (1) ON/Off Rocker Switch with LED Light & (1) Momentary Switch Plate - 15 Amp Inline Fuse - Dimensions: 2.95" L x 2.2" H x 1.57" D

I bought the 4 + switch panel, thinking it would be an interim solution till I could afford something nicer. Not so! It's really well constructed with an aluminum body, properly crimped spade terminals everywhere, love it. The stock set up has switches 1+2 fed by one power line (with a 15A inline fuse), switches 3+4 fed by a second line (another 15A fuse), and the momentary has two dedicated wires. Minus .00001 points for them drilling the center mounting hole _dead_ center, meaning that you have to remove the middle switch to mount the panel, but not even worth a ding. Great gear.

I had the switch installed 30 minutes after unboxing the item. I did not use any of the wire or in-line fuse that was included and installed on the wire lugs as I had existing wiring already in place that had the plugs ready to be pushed onto the lugs of the switch. I verified the contacts with a meter first, then mounted it and pushed the wiring onto the switch. Tested it to make sure it worked correctly and it did. Love it!

Works well. No issues. Used to install extra work lights on my truck. Don’t expect any issues.

Great product and very easy to install. The wiring is simple, one main hot and ground wire make it so simple. Mounted under my dash board and it is solid, more rigid than I expected. It is sturdy and works great, will definitely buy again.

Overall not a bad switch panel. I thought it was going to be a box instead it’s an L shape bracket. The switches feel like normal rocker switches only complaint I have is that the lights on the switches stopped working a few days after installing them. For the price it works and does what I need.

This came with one 20 amp fuse in a holder with 16 gauge wire attached. Then the wires piggy-backed to the other positive terminals were 20 gauge. Way to light for a 20 amp circuit!I used my own 14 gauge fuse holders and wire for this install. The panel is great and we shall see how long the switches hold up, they seem fine. If you don't want a switch light on just pull the black wire off and tape it up.

nice switches for the price.I put this in an old truck. The on/off switch controls the fuel pump and the momentary switch controls the horn.the bracket is sturdy.

iT WAS AN EASY WAY TO UPGRADE AN OLD SWITCH, AND HAVE 2 MORE FOR OTHER THINGS LATER ON MY GOLF CART. IT LOOKS GOOD AS WELL, AND NO LIGHTED SWITCH TO DRAW POWER, WHEN NOT IN USE. WHEN ON IT IS LIT, TO SHOW WHICH SWITCH IS BEING USED.

Quality