Gun Safe Replacement Lock Electronic Black keypad Safe Lock

Installed easy and worked perfectly with my safe that had a previously damaged digital lock

Have a Winchester TS26-45 safe the keypad stopped working on. It was giving 4 quick beeps. What I could find said that was a major error/failure and needed replaced. So I looked at many replacements. This had a good review so tried it. First, the keypads swap out with no need to change the mounting bracket (old one on top in picture to compare to new one installed). The cable feeds right through the hole the old one come out of with no issues to plug into the motherboard. The motherboard swaps out fine, screwholes line up perfectly (new installed old to left for comparison). One concern I had was the solenoid for the lock. The one it comes with (last picture) looks nothing like the one on the safe (3rd picture) but the plug is not a concern because you just use the old cable and it fits into the plug on the motherboard no issues. Reprogramming the combination is easy. Just use the red button on the cable, plug it into the plug on the left on the motherboard board and follow directions they send. Super easy. Will see how this one holds up. For the price cheaper than others I looked at that seemed more complicated. Hope this helps.

Excellent replacement for my Winchester safe. The original just quit working one day. Simple install. Very happy.

worked perfectly for my winchester TS26-45

Does what it's supposed to do, in my case replace a failed Winchester safe keypad that I can't get replaced because of poor Winchester customer service. Installation was easy enough. I didn't get instructions but if you can figure out how to remove the inside of your safe door, it's a 1 for 1 replacement. Didn't even have to install the included mounting plate because it fit on the existing one. My main gripe is the reprogramming process. From what I can tell, every single of these is programmed with the exact same default codes. That wouldn't be as big an issue if it were easier to reprogram it. The lock that came with the safe could be reprogrammed through the keypad utilizing a master code. This keypad requires pressing a button that plugs into the control board which you have to remove the inside of the door to access. So there's a world where you install this without setting your own codes, reassemble the door, realize you have to remove the door to reprogram, decide you'll do it later (then forget), then someone can use the default code to gain access. Just seems like an odd way to do that. Also they say there's a "master code" and a "user code." The master code doesn't do anything the user code doesn't do. It's just programmed differently. Cannot speak to longevity. The keypad that came with my safe lasted about a year before it failed completely. The cost of this isn't a hard pill to swallow one time, but hopefully it survives a few years before I have to go through this process again. Don't buy a Winchester safe if you can avoid it.

I've had TWO fail. I purchased the first replacement lock in 2022 and it lasted for about a year and a half, then quit working. I used it about 20 times during that period. I thought maybe I just had a bad one, so I ordered a replacement in 2024, which lasted about a year and a half and about 20 uses. So at the current price that comes out to about $3 per use. Unacceptable. There are tons of videos on factory resetting and troubleshooting. And I'm sure they are useful to someone with a working lock that just needs to be reset. If you try to get help with the lock, you will be bombarded with the same common fixes over and over. The first replacement lock had a failure in the keypad printed contact sheet that was unrepairable even for a master fixer such as myself, the second one failed somewhere in the PCB, most likely in the IC.

The keypad on my Winchester 26 gun safe went out so I tried this one as a replacement about a month ago. This kit comes with more than just the keypad, but that's all I needed to replace. It fit right up to the existing bracket perfectly. It works very well so far (fingers crossed) and my safe is 100% operational again. It wasn't difficult to install. Would definitely recommend this for a inexpensive fix if you're keypad goes out on your Winchester safe.

Perfect replacement for my safe!