Prothane19-1751 Super Grease Tube - 14 oz.

This stuff stays where you put it!! A couple of car buffs recommended this to me. I bit the bullet and spent the extra money based on their advice and I’m sure glad I did. I used this stuff it when I installed new bushings of my ATV, a Can-Am Xmr mud machine. After multiple bouts with waste deep mud, swamp water, dust, washing, drying, etc, I can still stick my finger in the bushing joints and find this grease on the bike. I tried Schaefer’s before this but it pretty much disappeared within one or two outings. This stuff is expensive but I won't ever use anything else ever again. Really amazing stuff

This is more lube that i'll use in a lifetime....only tracked this stuff down as it is the recommended lube for polyurethane bushings (regardless of manufacturer). The good: this stuff is the THE STUFF does a great job, the bad: it is sticky and tacky, you'll want a separate grease gun just for this

Apparently this is good for poly bushings, but it didn't seem to make mine quiet. I didn't expect it to, but it would have been nice if it did.This stuff is very, very greasy. It's the epitome of urethane grease. Wear gloves or you will have to wash your hands several times with dish soap to get them clean. Seriously. Wear disposable gloves.

If you have a lot of urethane bearings/joints, this is the only way to keep them lubed. Expensive, but you buying the best grease for urethane bearing surfaces.

Works great on poly bushings, same stuff add they send for assembly but larger quantity

Great Item. Used on My Dirt King Upper Control Arms Bushings. Stop the Squeaking.

Not worth the money. Bought the super grease and a new Alemite 500 grease gun so there would be no contamination from grease that was in the gun prior. Installed a new Saleen 35 mm front sway bar on my wife's mustang and lubricated the urethane bushings with this fancy super grease . 1 week later it was squeaking . Lubed bushings again squeaking in a week. I could have used most any grease and got the same results. I want my money back. I spent $40.00 for the grease and $30.00 for a new grease gun and have poor results.

Very expensive is it worth itMany other buyers have recommended for the type of bushings to help alleviate the noises I purchased it I believe in the previous reviews my opinion I think you’re crazy to spend $50 on grease for your bushings there’s a lot of other great products out there that I do the same thing I’m a put the product down but that’s a lot of money to loop a case of bushings I purchased another manufacturer I just wanted to compare it did the same or slightly better than this grease so I’ve gone with the other manufacturers PS it is so messy to work with I advise you if you use this grease wear gloves and be careful wear it hits the floor or the car it’s so hard to remove