Tyger Auto T1 Soft Roll-up Truck Bed Tonneau Cover Compatible with 2009-2018 Dodge Ram 1500; 2010-2026 2500 3500; 2019-2024 Classic | 6'4" (76") Bed | TG-BC1D9014

I have to say for the price this was an excellent buy. I put this on my 2016 Dodge ram Dooley and it fit perfect quality of the materials and parts was excellent. I was very impressed with how tight the tunnel cover was when I put it on the truck. Installation was easy it took me about 45 minutes maybe less we’ll see if it holds up but I believe it will stitching looks good material looks solid. Good instructions with proper grammar. Clamps are strong with nylon nuts. Velcro’s strong and good quality.

Nice quality, easy install and great fit.

Got this for my 2025 Ram 1500 with a 5’7” bed. It fit perfectly and was easy to install with just a wrench, screwdriver and a knife (knife to cut weather stripping). Took about 15 min to install and was probably the easiest tonneau that I’ve installed. Packaging was nice, instructions were simple, the cover looks good and seems sturdy. Time will tell if this was a good purchase but first impressions are positive. Installing it was easy to as I said earlier and can be done by 1 person since the railing sits on top of the bed rails. The track (rails) of the cover come with weather stripping installed but they provide 2 additional foam strips should there be a height difference between the bed rails and the front of the bed near the cab. Driving with it I didn’t notice any extra noise even at highway speeds (70+ MPH). The latch is a bit different than other covers that I’ve used in the past an instead of a latch on one side there is a cable that can be pulled from either side. The supports that are attached to the cover have a slight bow to them that should aid in shedding water . The cover has a curve in the edge closest to the cab that matches the shape of the bed and cab.

UPDATE: After about a month I deceided to losen the brackets that hold the cover in place. I pushed the entire cover and rails back about a 1/2" and now the cover and seal against the tailgate seem to be much tighter. I feel that this fix will stop most, if not all seepage. I did not have time to test with a hose and we did not get any rain since the adjustment. Pros: - Great appearance: I really like the curved braces—they help prevent water from pooling on the cover. - Easy to install: I took my time and still finished in about 45 minutes (the cold beer breaks didn’t help with speed). - Well made: It feels solid and well-built. I expect it to last a long time. Cons: IT LEAKS!: Despite adjusting the rails multiple times, I initially had about a 1" gap where the back seal didn't sit properly on the truck’s tailgate. After some tweaking, I got the seal to sit correctly. I then sprayed the bed with a hose, opened the tailgate, and still found water inside. More tweaking helped reduce the leakage, but it wasn’t fully resolved. I followed the recommendation to add more weatherstripping, which helped somewhat, but the cover still leaks a bit. I did take it through a car wash recently, and there wasn’t much water that seeped in—maybe the cover just needs time to "settle" into position. That said, my last cover allowed zero water through. I only replaced it because the Velcro kept coming undone whenever I drove on the highway. Overall: It’s a good cover, but be prepared to do some adjusting and possibly add extra weatherstripping to get the best seal for your truck. For reference, I'm using this on a 2013 RAM Outdoorsman.

Update June 6 2020: I'm getting ready to buy another one of these because the first one served me so well. Complaints about quality of latches and other hardware fall on deaf ears for me, as I never once had a problem with any of that after two years. This included numerous 4-6 hour trips at Interstate speed, as well as hauling all manner of cargo, rolling up the cover and securing it back down, the works. And never once the slightest water leak, in high-pressure car washes or thunderous downpours. In my experience these are solid truck bed covers at a bargain price. Spend $700-plus if you want, I really don't need to. (My original review follows.) Installed easily enough, snugs down easy, appears secure on the truck (2007 Ram 1500 Quad Cab, 6.5' bed). The clips are plastic as noted by other reviewers, but they seem sturdy enough. I'm not sure lightweight aluminum/alloy would be a whole lot better. I spent considerable time getting the rails lined up just right, so it locks down solid. After locking it down I tighten up the sides -- I pull the velcro loose and tug each side good and tight. That gives it a nice smooth appearance and makes sure there is excellent velcro contact all the way up and down. So far everything is fine. I've only rolled it up a couple of times, don't expect to have to do that very often, so I'm not greatly concerned about excess wear-and-tear on the plastic tabs or slots. It unlocks/pops loose easily, is very easy to roll up and the wrap-around straps hold it down good enough. When rolling it back down over the bed, it's important to make sure each end of the support slats goes down inside the rails. That is also very easy to do when I'm standing in the bed rolling it out. ONE SPECIFIC ISSUE and the SOLUTION: My bed liner has a lip over the front rail, plus a tailgate piece that comes up over the tailgate. The sides are bare metal, not covered. So what happened was I had a thin gap between the rails and the truck. It was also a little difficult closing the tailgate after I locked down the tonneau cover. So I bought a 30' roll of 1-1/2" x 1/4" neoprene foam strip ($25) to fill in the gaps on each side. It works perfectly. I didn't expect a super-watertight fit, but the foam strip sealed it all up very nicely. And I can close the tailgate without any real trouble. Bought "Used - Like New" through Prime and it arrived in like-new condition.

Perfect fit easy install

This is a great product, Install was a breeze (6 clamps to install). Zero fitment issues. Top and hardware seem very well made. Can drive 800km on hwy 401 @119km/hr with no issues or worries of clamps coming loose or top flapping too much. Great product for the money. Installed on 2021 Ram Bighorn Crew Cab (New Generation)

La instale y salí de viaje, durante el viaje me llovió y todo el equipaje quedó resguardado del clima sin problema! Además de que se ve muy bien en la camioneta

I love it, it is easy to roll up when needed. perfect so far, we will have to wait till winter comes and see if it stays dry. Excellent price, and easy to install. Thanks Amazon

Fácil de instalar, solo hay que tener paciencia para cuadrar bien y nivelar el seguro para el cierre. Tener la herramientas adecuada y listo! La instale en 1 hora probando el seguro y cuadrando primero!

Item arrived on time. Instructions are good. Materials appear to be good quality. Installation very simple and fit is very good. Instructions say you need a 10mm wrench and ratchet with socket. I only needed a 10mm flex head ratchet wrench. I laid out the side rails and cover and velcroed them together, aligned clamps, crawled underneath and you push bottom of the bolt, the nut end, up into the slot in bottom of bracket which then holds nut from spinning. Tighten top bolt head with the ratchet wrench. Simple. Lots of turning wrench but easy. May need to adjust tension on clip end. Temperature dropped, material shrinks a bit and became harder to clip down but as per instructions this can be adjusted with a screwdriver. Durability remains to be seen but quality seems to be there. Easy to rollup or out. Recommended.