✨ Elevate Your Space, One Cord at a Time! ✨
The UTW-CC1001-WH 10-Feet Cord Channel Raceway is designed to help you effortlessly organize and conceal cords along walls and door frames. Made from flexible, easy-cut material, it can be easily mounted with double-sided foam tape and painted to match your decor, ensuring a seamless integration into any environment.
C**A
"Some Like It ... Curved?"
While the product is really a great concept, they really should ship this flat. Other reviews mention the whole curling issue; and it is some epic curling. The best I could do was put the pieces under my mattress for a few days before installation, in hopes that it would stay flat-ish long enough for me to get the channel in place.My hopes were crushed. Basically, you'll need to have some brads (small nails) nearby to tack the channel down to assist the double-sided tape. It started curling back up before I could get the next piece started.I nailed each end of the length, and a few through the whole channel (outer and inner wall) into the crown moulding behind it. The holes in the outer wall more or less blended themselves, so it's barely noticeable. If you're painting afterwards, you won't need to ever worry about the small hole it made anyway, as the coating will span it without even the slightest issue.The bottom line is, if you need paintable, flexible (or curved in this case) cord management, this is probably going to be great for you. If you don't mind spending extra time in preparation or materials to get it to lay flat against a wall (99% applications probably are), this will be a fun project. But, if you want to unbox the product and slap it up effortlessly, and have installation completed within 30 minutes, you may need to look at plastic alternatives.I rated it 3 stars because "I like it", but not everyone will. I hope this helps someone to decide whether or not to purchase this.
S**Y
Matches existing moldings and wall color and hides unsightly entertainment audio cables
Great for hiding entertainment speaker wires for surround sound system.Unless you know it is there, you cannot tell it is not part of the molding around the room.Color matches perfectly for our living room.Found stapling it to the wall with handyman staple gun the quickest way to mount.Just opened the C-channel and shoot with the staple gun.
R**R
OK for the price, not a good long term solution.
There's a lot of reviews that claim that this channeling doesn't stick well, so I was worried about buying it, but the price in this size class was much cheaper than any of the other Prime options, so I figured I'd take the risk.I actually started this off as a 4 star review, but as I went to go take a picture of it, I noticed that a 1ft section had come unstuck from the underlying adhesive.It's certainly not beautiful, but it looks much better than cords hanging on the wall; for the price I think it's OK. It cuts & installs pretty easily. The plastic has a bit of a matte appearance not unlike play-doh, so it definitely doesn't look sharp, but blends well enough with the wall so it doesn't matter. If I wanted a more permanent application I think I would either fish the cord through the drywall or buy a stiffer cord track.
D**1
This is great!
I needed something that I could put across the threashold of my front door for power on the other side of the haulway. This works beautifully! It's dimensions fit perfectly under the door so it does not stop the door from opening and it can be cut to length so it is only as long as I needed it to be. I put the opening on the front (instead of the top) to keep out dust and dirt and will be a breeze to clean around. I didn't realize it came as two 5' lengths though which works fine for my use but something that others may need to be aware of.
D**L
I love this stuff.
Wiremold can eat it! UT Wire cord hide is superior in every way!1. Price - hmm..... $30 for 5 feet of Wiremold? OR $15 for 10 ft. of UT Wire? That is such a hard decision.2. Ease of installation - I put this stuff up in 20 min from start to finish. Wiremold can be a pain, especially when you are rounding corners.3. Ease of use - If I need to take a cord out, I don't have to disassemble the entire length of conduit like one would have to with Wiremold. Instead, I can just pull the wire out. Also, I can have different wires exit in different places without have to cut the conduit or install any fancy accessories.Bottom line. UT WIre is the best. I will use this for all my cord hiding needs.
R**N
not worth the money
I have bought a lot of these cord hiders over the last few years. The best ones I had found are from a big box store that is no longer in business. I had good hopes for this one, I measured what I needed, painted and installed it. Now a week later the cord hider keeps popping off the tape. It seems the tape is a cheep brand and cannot keep the cord hider supported to a flat surface. I would look for a better product!
P**R
It's big enough but that's it.
It was a little hard to work with. I had 15 feet to run and it was hard to get it straight, and the 3M tape is not sticky enough to hold. I had to use small screws through the back side to get it to hold. It is large enough for several cords, but that's it. It is an off white, so it will need to be painted if you want it to match your "white" base boards.
A**R
Seriously, one of the worst cable management options I've ever used.
I'm one of those people that nerds out on cable management. I use it for my desk, for behind our headboard, for the tv, and in the kitchen. I thought this might be a good solution to hide a long extension cord from an oddly placed outlet in the bedroom of a new apartment.This thing is completely made of a foam material and refuses to straighten. Trying to do so makes weird areas of the channel opening (which you have to tear to separate initially) more open than others. Trying to stick the foam adhesive they include was futile as it kept stretching out and not even sticking to the channel, let alone the wall. This was a complete waste of time and money.
R**T
UT Wire UTW-CC1001 WH 10 foot cord channel - white
Great thing is you can paint it to match your walls. Cords from Cable for TV fit nicely inside the channel. There was a bit of a problem getting the channel to adhere to the wall, the provided sticky tape on the back could be stronger. Now it's three months after initial installation, it's sticking to the wall, looks great.
A**Y
its exactly what you'd expect. the only issue I ...
its exactly what you'd expect. the only issue I had was because it came in a box, coiled up, it was an a$$ache keeping it straight. I'd put it up, then a day later it'd start to recoil back up.
H**Y
Good product but I need to tap small nails to ...
Good product but I need to tap small nails to hold it up... I followed instructions and it didn’t stick to wall.
A**R
Included double-stick tape (green roll) stuck to paper instructions inside ...
Included double-stick tape (green roll) stuck to paper instructions inside package. Had to rip instructions apart to get tape out.
C**.
This is a great product! it was easy to use
This is a great product! it was easy to use, looks great, and took paint really well. I definitely recommend. We used it to cover the cords from between our wall mounted guest room tv to the wall mounted entertainment center. it worked out perfectly. We plan to use the same setup in our master bedroom.
L**D
Great Cable Cover
This stuff worked great. You follow the instructions exactly and it works perfect. It says it is paintable, but I left it the color it came because it matched my wall. I even had some left over. I will purchase more. I am very happy with this product.
K**7
Unable to use
Came curled up and after taking it out could not get it to lie flat on the wall even after laying it out and putting weight on it for several days. Applying adhesive tape did not solve the problem either, just would roll up after a few minutes.
Trustpilot
1 month ago
1 day ago