Reese Towpower 44576 Class IV Trailer Hitch, 2 Inch Receiver Compatible with Dodge Sprinter 2500, Sprinter 3500, Freightliner Sprinter 2500, Sprinter 3500, Mercedes-Benz Sprinter, Sprinter 2500/3500

Quick and Easy bolt on. Remember to clean the threads if the car is older and has rust or debris. I used penetrating oil on the thread the night before and one of the original bolt in the tow hook to clear the threads the next day. I did it myself and used jack stands to balance the hitch to bolt it up. Fit great, built like a tank, weight wasn't too bad to handle on my own. Should function without any problems.

This item is a perfect fit for my Infiniti JX35. Came with good instructions and all required hardware (nuts, bolts, and washers). One thing to keep in mind and nit related at all to the product. Based on the year of your vehicle (mines a 2013), the predrilled factory weld nuts may be rusted and blocked up. I wire brushed and PB Blastered them and the provided bolts still would not thread through. I ended up having to run a thread repair bit through the weld nuts to clean them out. Once it was cleared, install took less than 30 mintues. I recommend you inspect the weld nuts first and cleanup before buying the hitch mount to save on actual install time.

My husband bought this for my birthday. We bought my Nissan pathfinder because it had the ability to haul our small trailer or our jet skis. Unfortunately Nissan dealer refused to put a hitch on the car because it would ruin the rear hatch kick open ability. I never use the door kick so I said I didn’t care but they still refused. Well this hitch was so easy to put on my hubby did it alone. No drilling necessary. Used available holes already in the frame and there no way it damaged the kick door. You can’t use the kick option because the sensor is blocked by the hitch but I haven’t missed it yet cause I never used it anyway. Since it’s still there and we didn’t damage the sensor, this addition hasn’t lowered the resale value either. I’m sure it’s as easy to remove as it was to install.

Very well made but the plug holder is welded to close to the center where it’s impossible to use a locking mechanism for the receiver. Easily installed

This receiver installs with only 6 bolts, three on each side. On my 2015 Infiniti QX60, I had to remove the tow hook from the driver side before installing the hitch. I will say this, the hardest part of installing the hitch was getting the threads that the mounting bolts go into clear and clean enough for the bolts to thread into them. If you have a new vehicle, or live in the south where road salt and corrosion is not an issue, you are going to have no problem. If your car is 5 years old, and lives it life in the rust belt....buckle up your chinstrap. You are in for workout. Luckily for me, the bolts that came out of the tow hook had had a shoulder on the front of the them, which effectively created tapered threads. By using these bolts, along with some Anti-seize, I was eventually able to get the threads opened up enough to get the new bolts threaded in. Once that happened the install took less than 10 minutes.

Great buy and fit car as expected.

Great hitch! Installed in a little under an hour and can be done with one person (I had my son's help though). Came with very detailed instructions and fit exactly like it should. We've used it a dozen times since for both pulling a trailer and using a hitch-mount bike-rack. Great hitch, absolutely will purchase from Draw-Tite in the future if the need arises.

I have a 2014 Pathfinder, this hitch was a perfect fit for my car, I did not have to cut anything and it has enough space for the spare tire to come out. The only bad news is the rust on the threats of the holes (After 6 years in the northeast the rust was pretty bad). I did have to tap them with a 12Mx1.25 tap after I cleaned the holes with a wire brush. Also do not forget to get a 6 inch extension for your ratchet, you will need it for the side were the exhaust pipe is.

Installation a bien été , important de bien nettoyer les trous pour boulon car beaucoup de rouille ... Bon produit de qualité ... facile d’installation Délai de livraison raté .... j’ai commandé le 28 juin ... suppose recevoir litem le 5 juillet .... reporté au 10 juillet .... que j’ai reçu le 11 juillet .... amazone n’était pas capable de me dire où était mon colis .... Mais l’article en soit est très bien bon rapport qualité prix

Easy install, holes lined up good.. other review says only 4 fit? Start all 6 then tighten. Use all 6!!

Fits almost perfectly on my Pathfinfer 2018. 2 holes out of 6 are misaligned by 1/8". I installed it anyway with only 4 bolts that should be enough for my needs.

Great quality… only concern is it sits a little low. Alternatively other options require cutting into the bumper cover. This as long as you are ok for the hitch to sit below the bumper… it’s great.

This was very easy to install. I installed this on my 2019 Nissan Pathfinder. The only slight adjustment I had to make was shave the first inch of the threads down to get them in the hole . I didn't have to cut the bumper at all to make it fit. Looks stock!