LASFIT PWY24W LED Bulbs Turn Signal Light PW24W Built in Resistor Canbus Error Free Extremely Bright Blinker Amber/Yellow Replacement Upgraded (Pack of 2)

I recently installed the LASFIT T3 7443 Switchback LED Bulbs (7444NA, White/Amber, 2pcs) for my front turn signals and parking lights, and I’m thrilled with them! The installation was a breeze—took just 5 minutes with no modifications or extra resistors needed, thanks to the built-in CANBUS system. They fit perfectly and work flawlessly, switching smoothly from bright white for parking lights to vibrant amber for turn signals. They’re 500% brighter than my old halogen bulbs, making my signals highly visible day or night. No hyper flash or error codes, and the quality feels top-notch. Highly recommend these for an easy, high-performance upgrade!

I have about a month using them and they look great and the bright ones that OE, nor any kind of error, hopefully they last a long time.

Fits my 2012 toyota camry se, plug and play type of style, took about 2 mins to change both and they are bright.

The Lasfit D2 turned out to be the bulb I needed for my Silverado. All the Lasfit bulbs are very expensive so make sure you order the correct version. I had to use their customer service for advice, they were great! Actual bulb installation is easy, finally no hyper flash!

My Honda Accord (2022) uses LED lamps on all exterior lights except the rear turn-signals... The rear turn-signals use an old-style 1157-A incandescent bulb. (why, Honda?) I really enjoy this car and I do use turn-signals 'religiously' when driving. I wanted brighter, more distinct turn-signals to help avoid traffic accidents. So, I replaced the original bulbs with these Lasfit products. The turn-signals are now much brighter and more visible under all conditions. These LED bulbs have the appearance of high quality and they work as intended. However... these bulbs are in my opinion TOO bright. If I stand behind the car with the turn-signals flashing they cause some discomfort to my eyes and leave me with after-effects similar to (old-fashioned) camera flash-bulbs. So I did some research and learned that there are laws in some parts of the USA which forbid retro-fit of LED bulbs into automotive lamp housings which were not originally intended for LEDs (from the factory). I applied some high-temperature RTV sealant across the face of the LEDs on two opposite sides of both bulbs to block the light from those LEDs, which effectively reduces the light output by 50%. now the light output is about right.

I ordered this set of Lasfit turn signal lights for my 2012 Honda Civic, and overall I'm satisfied with them. The bulbs do not hyper flash, just as advertised, no need to install a resistor as these come with built in ones, unlike other LED Bulbs require to install one, and they are very bright compared to the Stock bulbs. The installation was fairly easy, but I would recommend being extra careful when installing the front ones. one of the bulbs fell inside the housing, which forced me to remove the housing and bumper to retrieve it. That part was definitely frustrating and time consuming. I had to wrap the bulb and connector with electrical tape to ensure a tight connection and prevent the bulb from coming loose. once properly secured, everything worked great. Overall, they perform well and look Great, just take your time when installing to avoid extra work.

Easy to install and super bright. Much easier to see when reversing at night. Great upgrade from oem incandescent bulbs.

Those bulbs are much brighter than the stock ones they fit perfectly on my 2026 toyota 4runner parkinh/signal front lights

reverse light , nice color

Works great in my Chrysler 200. Far brighter than stock. No hyper flash so far either.

Although the Amazon fitment guide suggested this did not fit my truck, the description said otherwise that it did. This 921 or T15 was used for the cargo light within the high third brake light for a 2022 GMC Canyon truck. The base of the LED lamp inserted firmly and securely without issue and proved to be quite bright and matched the factory optioned Bed Lights Kit that is also LED based. Now both light sources match in colour and brightness but the center red portion of the high brake light was left with the original incandescent bulb. I experienced no issues with bulb out warnings on the dash info panel, and all remote key fob functions performed as usual. This Lasfit LED bulb has a similar filament position as the the original incandescent bulb featured, so it throws the light as expected. Although they are slightly longer than original, they did not come close to touching anything within the light assembly. All in all a very simple, effective upgrade for your Canyon or Colorado truck 2015-2022.

Potente luz blanca en los focos de reversa. Ayuda para ver más

Front driving/signal lights, amber. I installed these in a 2016 VW Passat Trendline. It took only a few minutes to do. They are much brighter than the original incandescent bulbs, and they do not cause the “fast flashing” that other led bulbs can due to their low amperage. They have been in use now for one month. VW wanted $100 for one incandescent bulb! Ridiculous!