Fremont 2 Drawer Tall with Open Cubbie

The quality of workmanship is excellent, and it assembles quite easily. Some folks have complained about the instructions, but I found them to be quite good and fully adequate. Based on other reviews, my first step was to start labeling the pieces with masking tape and a marker. But after about 2 pieces, I realized I was wasting my time. There was no doubt about the identity of each piece, if you look at the diagrams carefully. In fact, the one time I nearly did something wrong, I paused to study the instructions, and the details of the diagram showed the subtle differences in the hole patterns in the board, causing me to flip the piece and continue without further incident. So, just go slowly and carefully on your first one, look at the diagrams carefully until you're sure you have the correct parts laid out in the correct orientation, and you shouldn't have a bit of trouble. I bought two, and the second was short some of the nails used on the back cardboard. No big deal for me, but it might be aggravating for someone without 30 years of accumulated miscellaneous hardware. There were extra of those clever disk doohickeys in both of mine. All in all, I was perfectly satisfied with the contents. Note also that the packaging was excellent, and the parts did not have abraded surfaces from vibration in shipping. I found the tiniest chip in the edge of one of bottom front pieces, and simply colored it in with a dark brown sharpie, and the little white eye-catcher promptly disappeared. Note that you have a choice of bottom effects, if you don't like the gentle arc and prefer something a little more complex. (I like the simplicity of the arc.) I'm not a big fan of particle board furniture, but I needed a temporary solution and didn't want to spend a lot for something I might not keep for more than a couple of years. After assembling these, I find that I like them better than most of the $300+ nightstands I looked at in furniture stores. The drawer hardware is better than many of those units (some just had plastic slides). The overall value of these (looks and utility divided by cost) is incredibly high. Thus, I'm not only pleased that I gambled on these, but I'm also expecting to keep them indefinitely. When I do buy an entire new bedroom set, complete with matching nightstands, these will go into a spare room. I won't throw them away or sell them. They're just too nice. BTW, I was concerned about height, width, depth, drawer depth, etc., and these are just about ideal for my situation. I encourage you to take the published measurements and ensure they'll be appropriate for your bed height, wall space, etc. The only modification I made was to drill a 1" hole in the back of each of the shelf sections (and color the edges with that sharpie marker) in order to feed electric cords through. That was easy to do post-assembly, but you have to be careful with the drill, of course, moving it very slowly into and out of position. Cut gradually, gently through, or you may make a ragged mess. (It's often best to cut partway through, then jump to the other side and finish. This keeps you from busting outward the last layer of material.) In summary, this nightstand is well designed, easy to assemble, and is high quality in every discernible way. It looks good, functions well, and is an outstanding value for the price. No regrets whatsoever in buying.

Easy assembly and looks fine. Better than expected. Overall I’m pleased

First, I liked the look of this nightstand and liked that it was taller than my previous one. The 2 really good things about it are 1) it was easy to put together. The instructions were clear, all the pre-drilled holes matched up perfectly! All the parts were present as well as the screws and other items needed for assembly. 2) the drawers glide so smoothly you can open & close them with your little finger! So nice! Now the bad news: you can basically never move this once you finish it! There is literally no way to grab it to move it where some part of it doesn’t fall off! The top is not attached, so you can’t pick it up that way. The 2 narrow front pieces on either sides of the drawers are not attached. It’s flush with the floor, so you can’t pick it up that way either! Everything falls off when you try to pick it up! You really need to add casters to the bottom, if that’s even possible. Find something where the pieces actually screw together solidly.

This product came as described. My husband put it together in 30 minutes and I love it. It matches our son's headboard perfectly. He moved out and now it's the guest room. It's perfect.

Beautiful Nightstand, but Mine Arrived Slightly Damaged — And the Company Is Going Out of Business The Prepac Sonoma nightstand looks great once assembled. The espresso finish is rich, the lines are clean, and the open shelf + two‑drawer layout is really practical for a bedroom setup. It’s a nice‑looking piece of furniture for the price. Unfortunately, mine arrived slightly damaged, and when we reached out for replacement parts, we learned the company is going out of business. That means no support, no replacement hardware, and no way to get damaged pieces swapped out. You’re basically rolling the dice on what condition it arrives in. If you get a perfect unit, it’s a beautiful nightstand. But with no customer support or parts available, it’s a riskier purchase than it should be.