Marine-Tex RM305K Marine-Tex - White, 2 oz.

Great product..Thank you

Fresh inventory, works well.

I used this product to patch an old fiberglass pool slide. I have used many types of patches and putty in the past but this was slightly different in consistency. It was easy to mix and apply. It had the consistency of sticky tar and I was not sure how hard it would setup or cure. I let it dry about 48 hours before attempting to sand it. The product worked awesome. I used a hand held palm sander and had no problems sanding it smooth. Just want to make sure you don't put too much on because it sets up very hard. Once sanded and completely cured, I applied a primer and top coat to the slide. The patched areas are completely perfect, you would never know any repair was done, it looks like new. I would recommend this product to anyone.

Easy to mix up on a flat piece of cardboard, has at least a 20 minute pot life (flat cardboard life?), and extremely easy to work with.I found that you can wet your finger after you've applied it and smooth out your application. This makes feathering into the surrounding area much easier and, if you've done it right, means you probably won't have to sand it smooth when it dries. I'll definitely be using this in the future. Dries pure white with a semi-glossy finish when applied how I described. I may even use it to "repaint" areas with significant paint chips where sanding down a huge spot, priming, and multiple coats would be a pain (i.e. spaces with irregular edges larger than 3"x6" due to dock rash, etc).

ding 1 star for the packaging. the box contents comes in a bottle for the accelerant and a plastic tube and cap for the putty. You mix the two together to make the epoxy. The putty tube cap was not sealed on the tube, but the putty still worked. After mixing all the contents together and applying on the boat hull, I had enough left over to do a second coat once the first coat cured. I sealed the leftover epoxy in the tube and cap but it dried up and was not usable. The first coat put on the hull of boat came out good and was able to sand and smooth the cured epoxy. Also the color match the hull very good.

Marinetex is an outstanding two-part Apoxsee. Can be used to repair, fiberglass, and steel in just about anything else in this world. Very hard when it cures and his waterproof also. I use it for all kind of stuff. Very forgiving. Just an all-around great thing when you need it.

I filled a screw hole in the fiberglass where a latch was loose. then drilled a new pilot hole and replaced the screw. The new screw holds holds the latch securely.

Easy to use looks good and does not fall off.