Natural Barstool with Round Seat, 24-Inch

Easy assembly and instructions, comes with everything you need (ie an allen wrench, screws and screw covers). Unhurried and aided by my cat, assembly took me about ½ an hour. If i'd hurried - i might could have done it in 20 min. It's finished wood, so it goes nice in any corner of the room. Supports 350 lbs. Seems sturdy. Good Buy! :-)

A great barstool, especially for the price. i got it to use for photography and it’s amazing! Super sturdy and a good weight. It’s easy to assemble!

I’m in love with this stool. Pros: Excellent customer service. I needed a replacement screw. I emailed the company, offered to pay for the replacement. I received a reply within hours letting me know the replacement part was in the mail & there would be no charge. The easiest piece of furniture I’ve ever put together & I despise putting anything together. Anything!!! This is saying a lot for multiple reasons. I recently broke the bones in my forearm & I’m still gaining my strength back. I had no problems whatsoever putting it together. I’m a woman in my 60’s with horrible arthritis in both hands & I live alone. This was an absolute breeze. The allen wrench was perfect. I have no idea why so many reviews said it wasn’t sufficient. That’s nonsense. The instructions were easy to understand, but it actually didn’t even need them to put it together. It was common sense & it was put together in approximately 20 minutes. Other reviews noted that the plugs to hide the screws were hard to get in. Again more nonsense. There were no problems whatsoever. Cons: NONE If you’re looking for a good counter stool this is the one to purchase. It does not deserve a 4.4 satisfaction score. I’m surprised it wasn’t a 4.8. It’s a really great stool. So much so that I’m getting another one.

Update: 😂. I bought another one. This one was much easier to put together, I checked the screw holes they were good. One was off center but didn’t seem to be a problem. The little plugs were not sized for the screw holes… it’s a shop stool for my grandson so ¯\_(ツ)_/¯ Whoever thought you only needed the allen wrench provided to put this stool together had a cruel sense of humor. I got this stool after some thought just to see if it was as hard to put together as some of the reviews... well if you don't have some tools and are not familiar with woodworking yeah... Impossible. I have some skill but am not an expert. 1) The holes for the screws are not deep enough by about an 1/8 of an inch or so. Impossible to screw this large screw in without measuring the length of the screw with a drill bit an using tape to measure the amount of depth to drill the hole. 2) Yes, the wooden plugs to cover the screw holes are not the right size, but it was size of the holes not the plugs in my case. Also, if you did not make the holes deep enough for the screws you probably did not get the screw driven all the way in and it is protruding a little and not letting you put in the plug all the way in so it would appear not to fit. It took me 15 or 20 minutes to assemble the stool after I deepened the screw holes. It seems to be sturdy. It is a shop stool, not for your home as some of the plugs may go in too far and are not very attractive. 3) What do you need for tools: an electric drill and a set of bits. I doubt there is any quality control so you decide the size of the bit and how deep to make the hole. You need a good allen wrench. Preferably with a handle, even with the holes the right depth the encluded allen wrench would not work very well. You need a wooden mallet to get the plugs into place, some will look great, some may be too deep an not look very good. Don't expect the little pads on the bottom of legs to last long, but if the stool is in your garage or shop then that's not an issue. So overall it is probably worth the price if you have the done the noted work. Given the poor quality control your stool could have problems that mine didn't and you'd have to figure it out. The individual parts (except the plugs/plug holes) are engineered well enough to put it together without an issue in my case. Bottom line I would not buy this unless you have a little skill and a drill, drill bits, and a good allen wrench. A wooden mallet was helpful. Don't expect this to be attractive, it is a functional stool.

Lots to like here...top quality blonde oak, good hardware, easy to assemble despite the poor quality instructions. It wasn't necessary, but I used liberal amounts of Gorilla carpenter's glue, and I used my own Allen wrench rather than the inadequate one provided. My only complaint is the design; the legs are too vertical. They should have been set at a wider angle for stability. That way it won't be so easy to tip over. It could be dangerous the way it is. A couple of screw set points were off-center, but easily rectified with a center punch. Or just a little muscle, which requires a good Allen wrench, (not the one provided). The plugs were perfectly sized, not snug so use liberal amount of Gorilla carpenter's glue. Results perfect. Since I'll be using this in my garage workshop, I decided to give it a coat of Teak Oil sealant for extra protection. It didn't change the color at all, and the sheen is still the same. (It's curing now under my infrared garage heaters and floor fan.) Height of 29" is just right for my 5'9" frame.

Barstool was easy to put together, all the pieces fit together nicely. Color of the wood, and finish look great. Stools are comfortable to sit on at my island counter top for meals or crafts. Great choice for the price.

Very sturdy, perfect for my counter, and good quality.

utile pour les comptoirs lunch

doesn't come with good material and predrills. Wood was great quality, worth the price. The alignment is medicore. The screws it came with didn't align properly and wasn't pre-drilled, required ALOT of effort to fit properly. 1 of the screws kept stripping and i had to come back with wood glue to ensure it stuck together. Sturdy, and my family needed it so didn't return, pretty sure it will last awhile, but expected much more for a $80 stool

... Purchased an item that couldn't be assembled with the tools provided. This stool is actually impossible to assemble. The screws are too large for the holes so they cannot go through. I just can't understand what went wrong here, it's a shame because the stool itself looks fine, either way it's going back. A bit of a waste of time because I needed it for a photo shoot.

The screws stripped almost immediately from the Allen wrench.