Demon Complete Ski Tune Kit with Wax and Brush Kit- Snowboard Tuning Kit Also Includes Made in USA Wax

What a great kit! It comes with all the things that you need to get your skis or snowboard all tuned up. The iron works great. There's a bunch of maintenance and repair tools in here. The storage is ample with room to throw in a couple other odds and ends and keep it all in one convenient location. This is a great kit for probably anybody under professional level. I'm very happy with this purchase.

Great value. All the tools you need. I've used it dozens of times.

This is a great tuning kit for me as an entry level skier to use on my skis. It was fairly intuitive, although I had to enlist the help of my girlfriend when sharpening the edges and scraping wax off. It's great value for your money as it pays off after only a couple uses. It's relatively small, and so easy to put in the back of a car or storage.

Generally the kit works well. The iron works well. The wax is good quality. The brushes are effective. However, the edge sharpening tool is poor quality. Save yourself the time and money and buy a separate diamond one.

Picked this up to wax my snowboard at home and it works well. Easy to use and gets the job done without any issues. Helped spread the wax evenly and made the whole process quicker. Feels solid enough and works as expected. I’ve used it a couple of times already and I’m satisfied with the purchase.

Great for tuning your own stuff! I was using this kit for a whole winter and it was great to be able to put on a fresh wax whenever. Unfortunately now I don’t have a great space for it but look forward to using it in the future

Word as it should comes with everything you need to tune your board

Bought this kit to start tuning my own board this season to save money. So far it's been great as I've done enough YouTube research to utilize pretty much everything in the kit. A few things that have come up so far: 1) The plastic scraper will get dull pretty quick, but you can use the stick file to sharpen it. There's a YouTube video on how to do it. 2) I find myself mostly using the Brass brush pre wax, and nylon brush post wax, haven't had much use for the boar hair brush yet in my routine. 3) I splurged and got the 3 pack of diamond stones separately from this same brand as well. I was hoping they would fit in the white edge tool but they did not so I have to use them free hand. In the future I would recommend someone buying the whole diamond stone kit with the black edge tool instead of getting just the stones. 4) I think the fine grade scotch pad in the kit that I use for the final buff on my board will wear down pretty quick based on my use of it so far. So I'm already looking at options to buy another few of them separately before it wears down too much. Other than that, this is a great kit for the price!

I bought this before the snow season because waxing/tuning 3 boards and buying this set would cost basically the same amount of money. The tools were easy to use. There are dozens of how to guides on youtube about how to wax/tune your own board/skis. The iron heated up quickly and I had to actually turn mine down to medium low in order to not burn the wax. I made sure to lay down extra newspaper around my board/workspace, because there's a lot of wax shavings that will come off your board once you're at the wax removing/scraping stage. On the wax bar, it's divided up into thirds. I used one third of the wax for 3 snowboards. It wasn't a very hard process, and was actually rather relaxing being able to do it myself. my only advice? When you're scraping wax off your board, use gloves because the metal scraper is fairly sharp all around - I had cuts on my fingers of both hands without realizing after I finished scraping one board down. do NOT check the snowboard/ski edge sharpness by running your finger along it either. You can use the back of your nail - if you scrap your nail across the sharpened edge, nail bits should come off when the edge is sharp enough.

All over it is okey - the iron has an us/uk plug, so only possible to use in europe with a travel Adapter - edge tuner is bad quality and not accurate + Wax/repair sticks are okey as well as the explanations how to use it. + scraper is very good as well as the brushes

Awesome product, totally recommend

This is a very good kit. It would be nice to include a base cleaner. Also, when using the iron first time, make sure that its power output is set to correct input voltage level (120V/230V). It was set to 120V when I received it, and I switched it to 230V for the UK mains. There is no warning on packaging about this, but this might be important not to damage the iron.

Waxed 3 boards now and seems to be good so far , has everything you need plus some.