🔩 Upgrade Your Ride with Confidence!
The Dorman 905-405 Front Differential Mount is a precision-engineered replacement part designed to fit select Jeep models. Manufactured with durable materials and rigorously tested for quality, this mount ensures reliable performance and longevity. Easily verify compatibility with your vehicle using the garage tool for a hassle-free installation.
R**1
Fit great and eliminated the clunk sound
Fit great and eliminated the clunk sound. We've put about 3000 miles on it, and seems to be doing great.Unrelated to the product quality, home installation/removal of this item is a challenge. I futzed around an hour or so attempting to press out the old one, and ended up buying an air chisel, which drove out the old one in minutes. I used a ball joint press to install the new one. Using anything else is going to be very challenging unless you've removed the differential from the vehicle and do this job on the bench.In pressing in the new one, I removed the old bushing from the front mount bracket, and used the bracket with a flat bar stock to press the new bushing without destroying the center mounting hole. The bracket went sideways over the lip of the new bushing, bar stock went across the top of the bracket, and the ball joint press pushing down the center of the bar stock. Pretty hard to describe, and this isn't necessarily the appropriate place for that, but it's not as simple a job as one might be tempted to think.Pics show:- the old one before removal with the chisel while the diff is still in vehicle, but flipped downward for access.- The old front bushing bracket which was used to press in the new bushing- The old and new on the bench.
A**6
Good quality
Great buy, same as buying at the local auto parts store. Good dependable brand
J**R
Fits perfect
Fits perfect on my 2008 Jeep Grand Cherokee 4.7L.Fixed the problem, I will update in time.
C**D
Good quality so far two months in
Seems to be a decent bushing so far. Had it in for a few months now and it fixed my clunking when shifting from drive and reverse. Make sure when installing this that you have some sort of ball press joint, makes installing these a breeze.
M**I
perfect fit replacement
perfect fit replacement. i suggest using a pneumatic hammer to get the old ones out or very carefully cut it across in one section (comes right out after its cut. i used a dremel) also, rent a ball joint press from your local auto parts store to get the new ones in
A**R
Good works
Good fits
P**Y
Dorman is the way to go for stock replacement
Fits as it should
E**O
Four Stars
muy bueno
S**D
Parfait!
Fait comme une piece d'origine.
Trustpilot
1 month ago
1 month ago