DA82-02367A Y-Clip Assembly Kit Compatible with Samsung Refrigerator Icemaker Replacement AP6261443 PS12115467 EA12115467

So here's a chance to salvage that $2000 plus Samsung Refrigerator. If you not comfortable with doing this type of repair just hire someone to install the part after you've completely defrosted your refrigerator. If you're familiar with removing this ice maker you'll be able to install this item with no problems. First you'll need to completely defrost the ice maker and the air ducting around it. Once you're able to remove the ice maker you'll want to verify all of the ice has melted and dry out the ice maker compartment as much as possible. I just used a fan to defrost the entire refrigerator. (The results are worth the effort of emptying the frig and defrosting). The item is easy to install and you can put it all back together in few minutes at that point. While you're debating on buying this item you'll want to check the door seals as they seem to allow for more leaks over time as it ages. I found that the tops of my doors weren't sealing at all and a gap had formed that simply allowed a ton of moisture to continually enter the refrigerator (put a light source in the frig, turn off the lights in the kitchen, and look for light escaping. Most will require a step stool or ladder unless you're 6'7" like me). I used some self adhesive foam trim as a quick fix.. These leaks were the source of most of our issues with this samsung appliance. You know if you have a moisture issue if the back panel (big shinny one in the back) is covered in condensation. We had the solid block of ice around the ice maker and condensation on everything in the refrigerator section but nothing in the chiller or freezer section. Now I simply listen for a least one ice drop on the daily. Hope this helps..

Installs with no problems.

These little clips appear to have fixed the icing problem.

Installed on our Samsung RF28HMEDBSR in an attempt to reduce the amount of freezing water in the ice maker. It went on easy enough, but will see if it actually helps.

For how long is the question. I’ve done just about all I can do to remedy my ice maker to continue to keep preforming the way it should. Ice would pile up and not drop in the dispenser. Frustrating!

Worked great for a few months but now I’ve buildup is happening again. Will probably try this one more time as a temporary fix until I get a OEM part from Samsung.

👍🏻👍🏻👍🏻👍🏻👏👏👏👏👏

Hope it helps