2.4Ghz (1 TX + 1 RX) Wireless Audio Transmitter Receiver for TV, 320ft Long Range 20ms Low Delay HiFi Audio, Wireless Adapter Kit for Powered Speaker/Stereo/Soundbar, RCA(3.5mm AUX) Out/Input

UPDATE Dec 2024 - I have now owned this set for almost 4 months. It still passes bandwidth to the amp that far exceeds my hearing. The received lives outside and has seen near 100 degree days, and now near freezing nights. It still pairs within seconds and works just like new. I am still very happy with it and highly recommend. Original review - Sept 2024. I have a 1990's "stereo/amp" that far exceeds most current soundbar options. I can play FM, Vinyl, Tape, TV Surround, Dolby, Streaming stereo, and more. I wanted to send ANY of these to an outside amp on my deck, without drilling holes and running wires. This set was the answer. I attached the transmitter to the "monitor out" port on my main audio amplifier, and attached the receiver to the outside amp's input. The devices are about 20 feet apart, and paired within seconds of power-up. The audio is slightly lower than other options on outside amp, but since I can now play ANY of my audio sources from the master audio switching amp, it's not an issue. This could be because of the level I am feeding the transmitter. The transmitted audio range seems fine, and I did not notice any latency or other problems. For MY specific setup(older equipment), I had to purchase a set of RCA to RCA cables, but everything else was included. I am very pleased with the build quality, functionality, ease of set-up and value of this item.

Works as advertised - I use it to wirelessly connect a projector to a Bose 2.1 system. It’s easy to set up - mine paired right out of the box. Very occasionally, (maybe 5 times in the 3+ years I’ve been using it) one of the units won’t pair and needs to be reset. Easily done with a paper clip to push the tiny button on the front of the unit. I haven’t noticed any issues with audio quality, noise, or drop outs. I’d happily buy again.

I bought this device with the intention of using it to convert a custom home subwoofer into a wireless one. I noticed 2 major issues when using this product 1. There is a HUGE volume loss. I believe one of the other reviewers stated it had about a 10 db loss, which sounds about right. You really have to crank the gain up to get it to match a normal wired input level. 2. Loss of low frequency audio signal. This was a deal breaker for me. When running back to back comparisons from wired to wireless, I noticed the bass sounded super anemic when using the 1mii. Even after cranking the volume to match the wired level, I found that there was a ton of bass missing, I would guess around the 25hz - 50hz range. It was still audible, you could tell it was "there" but it had no depth and was almost muted. You couldn't "feel" it like how it is with the wired setup. The build quality felt great but this device should not be used for a subwoofer setup.

It does what it's designed to do and does it well. The build quality is great too. If I needed another set, I wouldn't hesitate to purchase it again. Keep in mind I used it for a subwoofer, so the sound quality is not as important as mid range or full range speakers, (I'm not suggesting that it won't sound good, I'm just saying I haven't tested it with Full range or mid range speakers). The range however is great with unnoticeable delay. I have the transmitter in a bedroom closet upstairs on the far end of the house, and the receiver is out on the patio downstairs behind a brick wall. Absolutely no connection issues. It just works!

For years I have been looking for a way to connect a portable speaker to my whole house audio so that I can have the exact music playing on all the hardwired channels, and also on a portable speaker out in on the grill island, etc. I tried many bluetooth devices and they all basically lack range, and the latency is always terrible. Even the latest aptX LL devices get out of sync with the digital signal and have drops, latency and plain old poor range through walls, when repositioning, etc. The 1 Mii 2.4 Ghz transmitter/receiver are a perfect solution. Plugged the transmitter into an output on my whole house audio. Grabbed a powered (bluetooth) speaker with an Aux in and plugged the receiver unit into Aux. (Not using any bluetooth.) I powered the 1 Mii receiver unit from a portable 5V power supply charger, so I did not need an outlet. Went to the furthest corner of my yard, maybe 100 feet through a cabinet, 2 interior walls and 1 thick stucco exterior wall, and it worked perfectly. I could even walk around with music playing without missing a beat. No latency that I can tell, and strong signal. Stereo audio sounds perfect. I will do a distance test later and possibly add to this review. And I am also going to try to power the 1 Mii receiver from the powered speaker at the same time as running the speaker, because most of these little speakers also act as a power bank. I will see how long the setup will run that way. Bottom line - I am throwing away the terrible bluetooth transmitter/receivers I invested in, and getting more of these to do dedicated wireless audio connections! Update 11/4/2022: Does not reconnect easily. Sometimes I need to re-pair the transmitter to the receiver. Very annoying. Dropping a star.

Acquistati per necessità di evitare cavi di collegamento lunghi tra mixer e amplificatore. Mi serviva che coprissero almeno 30/40mt al chiuso e che fossero "insensibili" al collegamento ad altri apparecchi come smartphone. Ebbene, essendo costruiti con ricevitore e tramettitore accoppiati, sono rilevabili ma non accoppiabili nè a smartphone nè a pc, ed hanno una portata, al chiuso ma senza troppi ostacoli, di oltre 50mt. La confezione comprende una coppia di cavi audio, una coppia di cavi di alimentazione e due alimentatori a 230v. Tutto Ok e ottimamente funzionante. Ho anche verificato se potessero funzionare con Power bank e hanno retto per ore, prima che si scaricassero. Nel mio caso ho dovuto costruire due cavi audio ad hoc per il Mixer e per l'entrata amplificatore perchè entrambi con XLR (Cannon). In più il collegamento audio è a bassa latenza, per cui casse audio dirette ed uscita amplificatore dopo i due tramettitore/ricevitore sono praticamente allo stesso tempo (senza ritardo udibile).

Great quality.

Ok

Los compré hace meses para alargar los cables que uso en mi pc y a pesar que el alargo está por el suelo y alguna vez lo he pisado sin querer, sigue funcionando perfectamente.

Prodotto di qualità, molto soddisfatto