- BETAZOOER Acrylic Mini Reptile Tank Habitat Transparent Terrariums with Locking Latch Suitable for Tarantula Isopod Roach Invertebrates (4''x4''x8'')

I rescued a western black widow just before snow started to fly. She was struggling to make it across my unheated shop floor. I scooped her up in a jar, transferred her to this setup and kept her in my living room so I could admire her on the daily. She seemed perfectly content. I fed her twice a week on pinheads. She filled a fair amount of the space with webbing and even stayed out where she could easily be seen, even though I placed hollowed out branches and other hidey-holes in there for her. Unfortunately, she had a bad molt and passed after 3 weeks. I was bummed, but I like the enclosure so much I'm going to get another and get a hold of two more widows in the spring. The entire design is simple. I'm not going to lie; my daughter was concerned that if the enclosure fell off its shelf, it may disassemble, or at least open up enough to where the widow could escape. I poked, prodded, jostled, and shook, but I was entirely confident there wouldn't be a problem. I stopped short of dropping it because resin sheet (specifically tabs in slots) are not the most robust and I saw no point in risking breaking the thing. I have no doubt it will hold up perfectly well. Straightforward design, easy access to the interior, and ridiculously easy to assemble or disassemble. For an affordable, basic enclosure, this one does the trick.

I’ve bought this enclosure twice now and it works great for my spoods. Easy to assemble and good quality. The cap didn’t go all the way in so I just took a razor blade and chiseled small slices off the pieces that keep it from setting in and it was an easy fix. I only ever see a gap in the sides when the lock isn’t fully pushed into place and I’ve had no escapes. This is great for sub/adult spiders

It works for what it's intended use is, but... with a little bit of tweaking that is... We use this for our pet pale green assassin bug, and before that we had it for our wheel bug (another type of assassin bug), it was very easy to put together, but there was a slight gap at the top where fruit flies (their food) could it get out and as time went on (about a month or two, we just got this tank I think at the end of October?) The plastic started to warp and We would put a rubber band across at the top so it could stay closed because it wouldn't latch properly, even from the beginning it was a little bit hard and left a slight gap at the top when we first got it.... Also, while my husband was trying to do his best to fix the warp, BARELY manipulating it, the plastic at the bottom snapped... But, in the products defense, I think the coconut coir (flooring/bedding used) was a bit too tightly packed, which may have exacerbated the warping or even caused it to warp. But other than those things, It gets the job done and honestly I think pretty much any tank like this would possibly have issues, but is perfect in size and accurate as far as the size and goes! And what we did for the sides of the vent (So fruit flies don't get out!) is cut small parts off of a roll of window screen replacement & use gorilla tape on the outside corners so it stays!

( yes I know I didn't decorate it cool it's too expensive/I'm talking about the prices of decors is expensive but no worries I'll decorate it better when I get the chance too) Love it, just like the picture A quick heads-up: don’t overfill it — too much inside creates pressure, which can stretch the enclosure and cause small gaps where spiders could escape. It’s held together by strong rubber bands, so keep decorations light and non-pressuring. If it looks cloudy, make sure you’ve removed both front and back protective screens — it’s double-sided. The feeding hole works well; just push and twist the cap to secure it. Not ideal for tiny spiderlings (they can escape), but perfect for chunky jumpers like Regals. Overall, great product! Just read the instructions carefully. I heard people were having problems with it being cloudy ( just take off the protective wrap it's on both sides of each panel and do that before putting it together) oh and definitely not for spiders that are really little maybe something bigger and chunkier like a regal jumping spider and try not to fill it to much where it's stretching out the container cuz remember it's basically rubber bands keeping it all together so if you and more stuff that pushes against the wall then of course the bands will stretch and there will be gaps But anyways it's pretty good highly recommend it especially because it comes with it's own little thermometer

I got this enclosure to house a jumping spider. PROS: - Easy to assemble. They also included more rubber bands than was actually needed, but I think that's a good thing just in case - The vent holes aren't as big as some competitors although I did have to cover them with some mesh because my spider was small enough that it could crawl through. - I loved the hole on top as it was easy to give food and water without having to open up the enclosure. Some other reviews didn't like that the rubber cap didn't stay firmly in place, but that didn't bother me as much. CONS: - I'm not sure what happened, but the acrylic panels started warping after a few days. In fact, they warped enough where there was a big enough hole between panels for my spider to escape :( According to my research, acrylic can warp under varied temperatures, but the temperature difference in the room the enclosure was in was about 10 degrees (between 65 to 75 degrees. So pretty much room temperature). I'm in the process of unwarping it, but that takes time and I'm not sure if it'll do it again in the future.

The BETAZOOER Acrylic Mini Reptile Tank is a versatile and stylish enclosure for a variety of small creatures, including tarantulas, isopods, and roaches. Key Features: Clear Acrylic: Provides a clear view of your pet's activities and behavior. Locking Latch: Ensures the safety of your pet and prevents accidental escapes. Compact Design: Ideal for small spaces and easy to clean. Ventilation: Adequate ventilation to maintain proper air circulation. The tank's transparent design allows for easy observation, while the locking latch provides peace of mind. The compact size makes it perfect for desktop or shelf placement. However, the acrylic material can be prone to scratches, so handling it with care is essential. Overall, the BETAZOOER Acrylic Mini Reptile Tank is a well-designed and functional enclosure for small invertebrates. It offers a clear, secure, and stylish home for your pets.

This product is a 10 out of 10 for my purpose. That is a 4inch pot for reference. The perfect home for the False Widow I found under my fridge. :) The back of the box it comes in have very easy and clear instructions printed on it. The cling film that protects the acrylic comes off with no drama. It even has little feet to it sits stable and doesn't slide around. For $20 it's an excellent value.

My preteen wanted this for the spider we found and made it a tiny home in this case before releasing later. It’s actually not too bad to clean and the doors are magnetized and easy to take on and off. My kid is happy so all in all, I’d say this is a nice little enclosure. That said, I’d say it’s kind of small for any creature to live in long term. This is more of a capture and release later type of case.