Elmers ProBond Professional Strength All Purpose Wood Filler, 32 Ounce Tub, Interior/Exterior Stainable (Pack of 1)

This stuff is awesome! Does exactly what it’s supposed to do. We used it to fill ten million bagillion nail holes in our 1958 cedar siding from the vinyl facade they put over it. It works perfect! Drys fast and sands beautifully for painting over. If it’s a warm day you’ll definitely want to add a little water bow and then because the tub can start to get a film over the material as it dries.

As a 3D printing enthusiast, I've found this to be an excellent product for filling gaps and imperfections in my 3D prints. This woodfiller is specifically designed to work with wood, but I've found that it works just as well on my 3D printed models. The woodfiller blends in nicely with my 3D printed objects, making any gaps or imperfections virtually disappear. The woodfiller is easy to apply and dries quickly, which is important when I have multiple prints to finish. One of the things I appreciate most about this woodfiller is that it doesn't shrink or crack as it dries, which can be a problem with other types of fillers. It's also easy to sand down to a smooth finish, which is essential for achieving a professional-looking final product. The 32-ounce container is quite large and will last a long time, even with frequent use. It's also reasonably priced, making it a great value for the money. I highly recommend this for anyone who needs to fill in gaps or imperfections in their 3D printed models. It's easy to use, dries quickly, and provides a great finish that blends in seamlessly with the surrounding material

I needed to fill and shape a large beem that had severe rot. It extended from a very old awning that was just for aesthetics but it was non-negotiable to remove. Not only was everyone pleased with the result but I was very pleased at how easy it was to work with. It handled large gouges that were several inches deep as well as the tiny cracks. Highly recommended.

this stuff is amazing and non toxic- Best filler I've ever used - just add a lil water and spreads like a dream

hasn't been applied long enough to speak to durability, but this set up more quickly than the regular wood filler by Elmers. the pro had a bit stiffer consistency and therefore i was able to fill holes in my deck wood with just one container. it took 2 containers of the non Pro version and that version - not recommended for exterior applications - and did not hold up to rain over time. i had soil erosion in the yard which allowed water to drain under my deck boards installed (by me) over 2x4s as a ground level deck in 2007. back then, the yard was fine, full grass, and no erosion or water drainage. after 10 years with dogs, no grass and soil erosion -- despite a french drain i dug in 2016 -- water leaked under and destroyed the 2x4s in places eventually causing wood rot to the boards from below. this product is a bandaid but i can't afford a new deck, so this will suffice for $25 (for 2). if it does what it says -- and if the wall i built in the yard to stop further erosion works -- this will prevent boards from further deterioration and protect the wood from additional rot this winter. i also had the misfortune of trying a Behr product which destroyed the protective layer of stain and now top boards are splitting and rotting as a result. thankfully, the second container can help with that....Elmers to the rescue again! **one pic shows where i had to replace certain portions of board damaged by water from below. i don't recommend doing that, but i couldn't unscrew the bolts to replace the entire board.

1. Product container arrived without any type of ziplock bag to keep product fresh. 2. Product dried very quickly when attempting to use, could not even spread it before it would dry up and fall off wood. 3. Product did not adhere very well to bare wood. 4. Had to stir constantly to try and keep filler pliable. 4. Container lid will not seal, see #1 ,I put it in a ziplock bag, hopefully it will somewhat usable when I use it tomorrow,

Great filler. Use it for filling gaps in my 3d printing projects. Sands great and a good price point.

I used this to fill some big gaps in my deck and it left cracks in it as it dried. It probably would be fine for small holes but don’t try to fill big gaps and expect a smooth finish.