Newentor Weather Station Wireless Indoor Outdoor Thermometer, Color Display Digital Weather Thermometer with Atomic Clock, Forecast Station with Calendar and Adjustable Backlight

It’s a great weather station and a value for the money. Easy to set up and to read at a distance. I love the plug in power with battery back up. Keeps the display on for easy reading at night or in the dark. Remote sensor works well and even has a display on the sending unit which is unique for this type of weather station.

For the record, I currently own 3 AcuRite weather stations and 2 same Newentor weather stations as well. This permits me to evaluate to the best of my knowledge these handy devices. Concerning the Newentor's, they exceeded my expectations considering the affordable price. Take note that at precisely 1H00 AM, 2H00 AM and 3H00 AM, the weather station will synchronize (blacked out display) with the atomic time. This process takes exactly 7 minutes. Viewing the detailed and colorful display will depend on the angle of view. This is normal with all makes of weather stations. Longevity and reliability is being closely monitored and now have 3 months of use on both of them. Be sure to place sensor in spot were no precipitations and direct sunlight reaches it. I personally use a just 1 sandwich bag with rubber bands to protect it from the elements. Humidity readings might affected, but this can be compensated by checking the weather channel reading, and add or subtract for conversion on your weather station. Replace batteries every year, otherwise if they leak, they will destroy your sensor. Only complaints, are the numbers for the time and date are small, and flashing clouds could be annoying. Personally, I got used too it and really not such a big issue on the long run. Cette station météo est très performante considérant son affordabilité. Vraiment surprenante considérant le prix fort raisonnable. Le synchronime avec l'heure atomique se fait ponctuellement à 1H00 AM 2H00 AM et 3H00 AM (écran noir), pour cela exactement 7 minutes. Prière de protéger la sonde extérieur par l'entremise de sandwich bags. Élastiques et tie-wraps font très bon menage pour le mini "emballage" de la sonde. Ensuite, les 2 tie wraps et élastiques vont sceller la sonde correctement face aux éléments. Il est fort probable que la mesure du taux d'humidité soit légèrement eronné, toutefois consulté un site météo pour votre région, et vous pourrez corriger en faisant une compensation mathématique. Remplacez les batteries de la station et de la sonde(s) à chaque année. Rien de pire que des batteries qui coulents une matière abrasive. Bien lire les instructions avant de déduire qu'un problème existe, même si celles-ci sont malheureusement pas disponible en français. La lecture du bel écran détaillé dépend grandement de votre angle de vision. Toutefois, celui-ci est très adéquat à mon humble avis. Je surveille de près la fiabilité et le bon rendement des stations (J'en possède 2 de ce modèle) pour les mois et années à venirs. Maintenant 3 mois d'utilisations depuis leurs achats, et sans problème. Les observation négatives sont que les chiffres de l'heure et de la date sont trop petits, et que les nuages clignotant peuvent distraire. Personnellement, je me suis finalement habitué. Toutefois, veuillez considérer toutes les informations transmis sur ce "grand" écran. André.

Only got 3 stars because of the service, not the product. It’s a great weather station but they sent the wrong mains cable. I needed one for the UK. I tried contacting them but got no response. I kept the station because I can use it with batteries.

Its ok

I say, "So far, so good", but I just set it up, so... :) ***The Good*** As soon as I unboxed it, I was impressed by it, it was larger than I had imagined. Immediately I placed the batteries inside both the indoor and outdoor compartments, then the fireworks began, well, I mean, the REALLY PRETTY COLORS came on! I like the fact that the numbers and letters on it are large, it makes it REALLY EASY to see! Very nice, especially when compared to my older one (different brand) that I used since 2016, it finally gave up the ghost. It didn't take any time at all for it to recognize the outdoor sensor, on my old one, it took several minutes, so technology is a good thing. It looks like a computer monitor screen, it looks REALLY NICE! _________________________________________________ ***The 'Not So Good'*** (But not really, 'bad') (1) When hanging by a screw that I have in the wall, the inside unit wants to swing when touched, which is NOT GOOD at all, it is NOT SECURE, it just 'barely' hangs on the screw, so, if anyone, especially a clumsy or young person that has too much energy comes along and pushes against it too hard, well, it could sure fall. (This does have some somewhat flimsy 'legs' that pull away from the back like a picture frame has on the backside, so if you are one that prefers it to be on a table or desk, that should suffice IF there are no cats, dogs, or young kids around) I always have some Velcro on-hand, so I placed 'one side' on the back of of the unit, along with the 'other side' of the Velcro STILL STUCK ON IT, then I positioned it on the aforementioned screw, then FIRMLY pressed them BOTH against the wall to ensure that the sticky Velcro is adhered. This is very easy, I'm sure that I make it sound harder than it actually is. Although I don't feel that this is a good design at all from the factory, it is hanging there firm enough that it should not ever be a problem after using Velcro. ***(When changing batteries, you need to unhinge the upper part that hangs on the screw, then gently, not forcefully, pull away from the wall to separate the Velcro)*** _________________________________________________ (2) The outdoor sensor received the same treatment, I placed the Velcro on the backside of it, then pressed it onto my outside wall underneath the eve of the house. I already had a cut-out from a clear plastic bottle (Maybe it was an old ketchup bottle?) that I cut to fit over the sensor to protect it from any rain that 'could possibly' get on it. (This is only recommended, you do not have to do that, it worked for years on my other one) _________________________________________________ (3) The TAB on the back that is where you would grab to lift the battery compartment lid is odd. They expect you to hang it by a screw, I assume, so there is a small opening on the back of the sensor. The TAB I mentioned prevents the sensor from laying flat against the wall, which is a crazy design. When I placed the Velcro on it, it sticks fine to the lid, but when you press it against the wall FIRMLY, that TAB prevents it from being secure against the wall. I could have removed 'some' of the TAB, but I didn't, just be aware of this in case you want it to lay flat against that wall. If your preference is you like the screw method best, it will work, but, a slight knock on it and it will fall onto the ground, hence the Velcro. Be forewarned! There is more good than any bad, so don't let me scare you. I cannot really state what this can do until after I actually use it, that takes time, and when and if something on it goes awry, I will most definitely return here and let y'all know. My first impression of it is, I REALLY LIKE IT! Hopefully it will live up to that. :) (11-17-2024)