Magnet Paint Co Chassis Saver - Gloss Black - MPC-UCP99-04 (Quarts)

Amazing product! Dried quick and had glossy finish. I’m converting a school bus to a camper, it really helps saving the rusty floor.

Excellent product and dries very quick . Kinda thick and easy to work with .

better than por 15! good stuff! rock hard and doesn't require the prep por15 requires!

It does really good job and you guys got it on time thanks

This chassis paint offers extremely good coverage and looks to be very durable and should provide optimum anti-corrosion capability when applied to the underbody of vehicles or as applied to other items affected by outdoor environmental factors. I used it to paint new rear leaf springs to my MGB prior to installation. Since I had the can open, my wife asked that I repaint her wrought iron patio furniture and we were very pleased with the coverage and the look. One should note, this paint is very hard when dry and the manufacturer advises caution that the paint can glue steel together. So if there is any paint residue on the edge of the can when storing any unused portion, one should realize that it is very difficult to remove the cover when attempting to use the paint on a subsequent paint session. I would advise that you purchase only what you can use in one or two coats as it will dry inside the can once opened unless you place a reducer in the can to cover the remainder of the paint after the container is opened.

Sprays just like an automotive paint very glossy finish.

This stuff is pretty amazing. I had a trailer hitch that was rusting away, sandblasted and rewelded. They wanted $200 to powder coat but I think that would have been a waste. I decided to give this stuff a try over por 15. I got to say I am very happy. I applied the paint to a warm surface and left it in a low humidity high heat environment overnight. It dried rock hard. I don't think the stuff is ever going to come off which is good. I got a little bit on my skin and I doubt that'll ever come off either. I applied three coats at 2-hour intervals. The smell isn't as strong as I expected and once dried there was no odor at all. Whatever brushes you use will probably end up in the garbage because this stuff is impossible to remove so make sure you have a bunch ready. You must stir the can and avoid shaking it. If you shake the can you have to let it sit for 24 hours to settle then stir. I only used less than half a quart to do the entire trailer hitch which is massive. A little bit goes a long way. I will use the remainder to touch up some of the underside components on my Toyota.

Prompt delivery. Just a heads up, don’t get this on yourself, it doesn’t scrub off, it wears off.