Window Dryer Vent - The Original Window Vent Kit for Clothes Dryers, Adjustable Sliding Metal Dryer Window Vent Exhaust Hood Fits 24-36” Windows, Heavy Duty 4 Inch Dryer Vent Window Kit by Vent Works

Moved washer and dryer from the basement to a 2nd floor bedroom which was converted into a laundry room in 2021. Have been using an indoor dryer vent kit (bucket type with water in it) in combination with ceiling exhaust vent, dehumidifier, and opening a window.Dryer use generates so much humidity that wood trim in the room becomes wet very quickly especially if the measures mentioned previously are not done. Contemplated having a hole bored in the side of the house to vent the dryer outdoors. Relative mentioned that dryer vents exist which can be placed in a window. Compared features of others and selected Vent Works because of the material and ease of taking it in and out of the window. Plan on leaving it installed throughout most of the year except for Winter when it will be taken in and out. Used for 1st time today, and thought that it would eliminate the need for the dehumidifier. Had dryer on a few minutes when a stand alone guage showed humidity 67% and climbing so then the dehumidifier was turned on. Oh well I'm still impressed with the vent even if it doesn't eliminate the need for the dehumidifier. It did keep the temp in the room from rising as high as it used to go when not venting out of the window.I highly recommend this Vent Works vent.

This thing is a lifesaver! It took me some wrangling to make it work perfectly for us, so here's the rundown on how we have ours all set up. I didn't want to cut a hole in the exterior wall of our house to vent from our new first floor laundry room, so I was thrilled to find this expandable window vent- it's sturdy metal and slid right in to the window frame in five seconds. It came with a screen cover for the hole to the outside, which I wanted to prevent any critters from outside crawling up into the vent. Originally, I had a metal clip and screw-on dryer hose attached, but because of the screen, dryer lint can back up there every few loads (especially since we have pets and the fur that brings). It was kind of a pain to unclip the hose every time, until I picked up a snap-on hose kit (this one is the STV-M Dryer Duct Connector - DIY Easy Dryer Vent Hookup Kit by Ziggurat, also from from Amazon). Now, every other load or so, I easily slide the plastic connector off, remove the lint and pop it right back into place in seconds. We live in a winter wonderland, so I also bought some white weather-stripping insulation tape to place around the edges in the window to keep any drafts from sneaking in around the vent (old wooden window frames, so it also helps give it an even pad to cling to all the way around in the window). Absolutely perfect for our old house with no destruction, and I'll never have to do laundry in a basement ever again. I think this vent will last us a long time and I hope they keep making them forever. Also, we had a repair guy in to balance our washer and it completely blew his mind- he thought it was the neatest dryer set-up he'd ever seen.

I needed this product to vent my drier bc I was using an indoor vent that became a disaster. It created sweat and fine dust which stuck to the sweating.. Buy a window vent and save your house from water damage and swelling...

Wasn't sure what to expect, as the photos just look like cheesy galvanized sheet metal, but the mfg did a thorough job on this product. The edges are almost all folded back on themselves for extra strength and rigidity, plus it eliminates most of the potentially sharp edges. It's a solid, heavy-duty item. Both ends slide out to fit the window frame, which, if you're not using the full length, gives you some flexibility on where you place the vent opening in the window opening, in case it matters.Installation was a breeze, the hardest part being crawling in behind shrubbery to remove the window screen, which on my windows need to be removed from outside. It fits snug and solid, although I'll probably seal the top with a strip of weatherstripping to fill the tiny spaces bugs could get in. It would have been nice to have a 36" strip of sticky-back foam weather strip included, for the price, but no such luck, meaning a trip to Home Depot. And that's maybe the only downside of the product - the price. It's a bit steep, but since I've found nothing similar in style or quality, they get to do that! I had the option of not paying it, of course, and trying something else, but it turns out I'm very happy with my purchase. A well-made product that does its job effectively - can't ask for more than that!

Super fast shipping exactly what I ordered a+++