A-Premium Electric Power Window Regulator with Motor Compatible with Ford Focus 2012-2018 Front Right Passenger Side

I ordered this from UK and obviously I wanted a drivers side window regulator but because it would have wrong side I ordered the passenger side they drive in the other side its the same but a mirror version but fits perfectly. Hopefully you'll remember the same rule if you come across anything like this . But brill postage and brill part . Brilliant company thanks very impressed

Didn't use the linkage, just used the motor.See videos on YouTube.

fit for 2013 ford focus and working great

Before you order the part, You have to pull the door panel to determine if you have a 6 pin or 2 pin power connection. You will prob need to pull out the old reg to see if it’s 2 or 6 wires. You have to addoread the plastic clips where the window attaches to get reg out. Read on. 2 or 6 pin electrical connector connects into the bottom of the power window motor. Mine was a 2 pin. Make sure there are no broken glass pieces in the window tracks!! Excellent product but not easy to install the first time. Clever way the window plastic connectors snap very positively into the holes in the window. Look at the 2 plastic pieces that will be clipping into the window. Before you put reg into door, Practice spreading that clip about 1/4 inch -you will be doing that to connect the window in. You will be spreading those clips when you attach those 2 to the glass. First step get the rear half of regulator into the door. Then that enables you to get the front half into the door roughly where it goes. Next. The trick is to lower window and regulator both down about 3/4 of the way. Watch out. It will eat your fingers. I lower it a little at a time with my hands out of there. Watch out for 1 touch power windows. . It will go all the way down. So instead Just barely bump switch to lower it gradually. Keep hands out of there and turn off key between moving things. Then spread the clip on the rear half enough to get the glass with the hole in it into the plastic piece that then clicks into the window when you finally get it lined up with the hole in the glass. Do the rear half first because You can see what you are doing to learn exactly how hard ut is to spread the clip and click it onto the window. This is not easy. You might want to use a 5-6 inch long screwdriver to help spread the clip to get the window into the clip. Then you line things up by moving it around carefully until the pin in the glass holder “clicks” into the hole in the glass. Do not install the track to the door yet. Now that you know what you are doing and how to spread the plastic window holder it will be easier to do the front piece of the regulator. Remove the speaker because you need that big hole for access. Once both sides are clicked in then start all 5 screws (T30 tire socket) before you tighten them. Start the upper screws first. Lube the track now then test.

This part came to Australia in a timely manner, and was a direct fit for my replacement part. The six pin connector is not so common in Australia. I ordered the driver’s side knowing that I needed the left hand side. It went straight in.

The media could not be loaded.  It works very well with my 2012 Ford Focus. I saved a lot of money by buying this part.

This product did not fit my 2012 Ford Focus as advertised. Great customer service with getting my return request approved